Elinchrom LampHead Zoom Pro

Rated 4.7/5 based on 11 customer reviews

59545 ar PVN

Piegādes laiks parasti 8 - 12 darba dienas ja ir pieejams piegādātāja noliktavā

19262
7630006308690
Elinchrom

Jauns

07.04 - 22.04.2024
Saņemt veikalā
Bezmaksas
09.04 - 25.04.2024
Pakomāts (Omniva, DPD, Venipak)
3 €
09.04 - 25.04.2024
Kurjers (DPD, Omniva)
no 10 €
07.04 - 22.04.2024
Velokurjers (tikai Rīga)
no 7 €
595.45
Līzinga kalkulators
Termiņš, mēn.
3
6
12
24
36
Pirmā iemaksa,,
Men.maksājums,
no 

Oriģinālais preces apraksts no ražotāja (oriģinālā valodā)

The Elinchrom Zoom Pro Head is compatible with all Elinchrom power packs made in or after 1981. Its Intelligent Flash Cooling system responds to the heat generated by the 300W modeling lamp and 3,000W/s flash tube by running faster at peak performance and slower at lower power, thus extending the life both. The head derives its name from the unique focusing design that allows you to move the flash tube closer or further away from the reflector like an open face hot light for harder or softer effects or to perfectly fill the accessory in use.

While the recycling time is determined by the pack in use, suffice it to say that the Zoom Pro can handle anything in the Elinchrom family of products. The head features a clear, protective glass dome and has a built-in 90° reflector which is perfect for umbrellas or soft boxes. A standard, built-in Elinchrom bayonet mount gives you access to the huge array of legendary EL-Reflector and Rotalux light shaping tools.

Characteristics and Features
  • Small user-replaceable, plug-in UV coated flash tube with short flash durations and better power control.
  • Included transparent, security glass dome.
  • The Zoom Head can be either used with 110 or 230 V Elinchrom power packs. Swap the halogen modeling lamp and fuse to conform to the correct voltage.
  • Efficient built-in reflector, with a 90° light distribution to maximize softbox performance. Additionally, there's a zoom function for the flash tube and modeling lamp for a wider or more focused light beam when used with reflectors.
  • Reflector-bayonet mount with breech locking ring fits all Elinchrom reflectors since 1974. Huge EL-Reflector and ROTALUX softbox range.
  • Centered umbrella fitting with additional umbrella holder at the tilt head.
  • Efficient low-noise fan-cooling. The fan spins slowly at low temperatures and fast when the head heats up.
  • Illuminated on/off modeling lamp switch, with LED overheat indication. The halogen modeling lamp shuts off when the red warning LED lights up, until the head cools down. The flash function remains active.
  • Aluminum chassis with fire resistant housing.
  • Extremely lightweight, only 5.0 (2.3 kg), including the 16.4' (5 m) heavy-duty flash cable.
Maximum Watt/Seconds3,000W/s
User Replaceable FlashtubeYes
CompatibilityAll reflectors from 1974 on and all packs from 1981 on
Changeable ReflectorYes
Circuit ProtectionFuse
Cable Length16.4' (5.0 m)
Modeling Light Wattage300W
Modeling Light On/Off SwitchYes
Protective Glass DomeClear
Fan CooledYes, electronically temperature controlled
Mount5/8" (16 mm)
DimensionsWith protective cover: 9.6 x 4.1 x 8.0" (245 x 105 x 205 mm)
With glass dome: 9.4 x 4.1 x 8.0" (240 x 105 x 205 mm)
Weight5.0 lb (2.3 kg)


Kā iegādāties preces līzingā?

  • 1. Izvērtē savas iespējas.
  • 2a. Ja vēlies iegādāties tikai vienu preci ar Aizdevums.lv līzingu, tad aizpildi pieteikumu šeit
  • 2b. Ja vēlies iegādāties vairākas preces vai izmantot citu līzinga kompāniju, tad liec preces grozā, un pie pasūtījuma nodormēšanas izvēlies līzinga pakalpojumu.
    Piedāvājam līzingu no Aizdevums SIA, Incredit SIA, ESTO.
    Konsultanti pārbaudīs grozā esošo preču pieejamību un nosūtīs aizdevuma pieteikuma saiti.
  • 3. Ja saņemta pozitīva atbilde, sazinies ar mums par preces iegādi. Konsultanti pārbaudīs preces pieejamību.
  • 4. Ja prece ir pieejama veikalā vai pasūtāma no noliktavas, un esi saņēmis apstiprinošu atbildi no mūsu konsultantiem, dodies pie mums uz veikalu, lai noformētu pirkuma un līzinga dokumentus.
  • 4a. Vari arī lūgt mums izrakstīt rēķinu par šo preci un pats doties uz kādu no līzinga devēja filiālēm, lai noformētu līzinga dokumentus*.
  • 5. Kad līzinga dokumenti ir noformēti, vari doties saņemt preci veikalā (ja tā ir uz vietas) vai informēt mūsu konsultantus, lai tā tiktu pasūtīta no noliktavas.
  • *Līzingā iegādātām precēm ir iespējams noformēt piegādi, tāpēc visu iegādes procesu vari veikt arī attālināti.
    **Tāda pati līzinga noformēšanas soļu secība ir arī InCredit Group piedāvātajiem līzingiem.
    ***Neskaidrību gadījumā sazinieties ar mūsu konsultantiem!

    NB! Izmantojot līzinga pakalpojumus, rūpīgi izvērtējiet savas iespējas aizdevumu atmaksāt!
  • Nosūtīt pieteikumu

Uzdot jautājumu

Pasūti uzreiz


Available from warehouse