Wireless Lavalier Microphones - Saramonic BLINK 500 B6 TX+TX+RX UC 2 to 1 - 2,4 GHz wirelss system USB-C Android & iPhone 15 - quick order from manufacturer

The Saramonic Blink 500 B6 is an incredibly compact, lightweight, and professional sounding two-person wireless microphone system that was made to be used with mobile devices that have USB-C ports, like Android smartphones or tablets, computers, and more. The two included transmitters are small enough to clip directly to shirt collars, and the included RXUC receiver is so lightweight and unobtrusive that it can easily be used in handheld gimbals. The Blink 500 B6 makes using multiple wireless microphones as easy as possible and it provides broadcast-quality sound in a package that's incredibly compact and lightweight.

Product Video
 
 

Saramonic BLINK 500 B6 TX+TX+RX UC 2 to 1 - 2,4 GHz wirelss system USB-C Android & iPhone 15

Rated 4.7/5 based on 11 customer reviews

20945 tax incl.

Pre-order. Delivery time from 3 weeks.

24248
BLINK 500 B6
6971008024562
Saramonic

New product

possibly after 19.04.2024
Pickup in store
Free
possibly after 19.04.2024
Postbox (Omniva, DPD, Venipak)
3 €
possibly after 19.04.2024
Courier (Omniva, DPD)
from 10 €
possibly after 19.04.2024
Bike delivery (in Riga only)
from 7 €
209.45
Leasing calculator
Payment period
3
6
12
24
36
Downpayment,
Monthly,
no 

Tiny body, huge sound. The versatile sub-compact wireless transmitters that come with the Blink 500 B6 have excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 omnidirectional clip-on lavalier microphones, providing an even more professional and inconspicuous miking solution. The impossibly compact RXUC dual-receiver plugs directly into the USB-C port of your device and it doesn't require any batteries or charging to operate. There are no controls to fuss with, either. You just plug it in, and it works. So advanced, it's effortless. Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B6 is so technically advanced that it couldn't be easier to use. Even though there are very few controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot. Perfect levels and power. One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The internal Lithium batteries get 5 hours of life from a charge, and the USB-C charging ports can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces. Handheld gimbal, meet wireless sound. Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXUC included in your Blink 500 B6 kit changes this story. It's small and lightweight enough to remain mounted to your device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage with the fantastic ability to put wireless mics on two separate people. An ideal wireless system. Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with a mobile device and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. This system is small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility. Transmitter Specifications: Frequency: 2.4GHz Oscillator Type: Gaussian Frequency-Shift Keying (GFSK) RF Frequency Band: 2400 to 2483.5 MHz RF Output Power: 10 mW Signal to Noise Ratio: ≥70dB Voice Delay: ≤6ms Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation) Audio Gain Control: 11dB, 18dB, 25dB Plug-In Power: Yes, 1V Distortion: ≤0.1% Digital Resolution: 24-bit / 48kHz Frequency Response: 20Hz to 16kHz Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area Max Number of Simultaneous Systems: 18 (up to 36 Microphones) Antenna: Built-in 1/4λ Wire Antenna Buttons: On / Off / Pair, Volume Up, Volume Down Battery: Built-in Li-ion 3.7V / 400mAh Approx. Battery Life: 5 hours Charging Connector: USB Type-C (1.5 hours to be fully charged) Input: 1/8'' (3.5mm) Microphone Input Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished Microphone: Built-In Pressure Operated Electret Condenser Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier) Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier) Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier) Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier) Mounting Clip: Built-In Operating Temperature: 0℃ to 50℃ Storage Temperature: -20℃ to +50℃ Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm) Weight: 1.2 oz (34g) Receiver Specifications: Frequency: 2.4GHz Oscillator type: Gaussian Frequency-Shift Keying (GFSK) RF Frequency Band: 2400 to 2483.5 MHz Signal to Noise Ratio: ≥70dB Voice Delay: ≤6ms Distortion: ≤0.1% Digital Resolution: 24-bit / 48kHz Frequency Response: 20Hz to 16kHz Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area Antenna: Built-in 1/4λ Wire Antenna Connector: USB-C Male Button: Pairing Pinhole Button Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX Operating temperature: 0℃ to 50℃ Storage temperature: -20℃ to +50℃ Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm) Weight: 0.35 oz (10g) 2 x Blink 500 TX Transmitter with Built-In Microphone and Clip 1 x Blink 500 RXUC Dual-Receiver with USB-C Connector 2 x SR-M1 Omnidirectional Lavalier Microphone 2 x Alligator-Style Lavalier Microphone Clip 2 x Foam Lavalier Windscreen 2 x 1’ (30.5 cm) gold-plated USB-C to USB-A charging cable 1 x Pairing Pin

Type of ProductPiespraužamie mikrofoni
MicrophonesLevaliers
Microphone connectionwireless
ConnectorUSB-C
How to buy goods on lease?

  • 1. Evaluate your options.
  • 2a. If you want to buy only one product with Aizdevums.lv leasing, then fill out the application here
  • 2b. If you want to buy several items or use another leasing company, then put the items in the basket and choose the leasing service when ordering.
    We offer leasing from Aizdevums SIA, Incredit SIA, ESTO.
    Manager will check the availability of the items in the cart and send the loan application link.
  • 3. If you receive a positive response, contact us to purchase the product. Consultants will check the availability of the product.
  • 4. If the product is available in the store or to be ordered from the warehouse, and you have received an affirmative answer from our consultants, please visit the store to proceed with purchase and leasing documents.
  • 4a. You can also ask us to issue an invoice for this product and visit one of the leasing company branches to sign up leasing documents *..
  • 5. Once the leasing documents have been signed up, you can receive the product in the store, if it is on site or inform our consultants and they will order it for you from the warehouse.
  • *It is possible to arrange delivery for leased goods, so you can also perform the entire purchase process remotely.
    **The sequence of leasing steps is the same for leases offered by InCredit Group.
    ***In case of doubt, contact our consultants!

    When using leasing services, carefully evaluate your options to repay the loan!
  • Lease

send a message

Quick order


This product is no longer in stock