Kameras pultis - Pixel Timer Remote Control Wireless TW-283/DC2 for Nikon - ātri pasūtīt no ražotāja


1x TW-283TX Transmitter;1x TW-283RX Receiver;1x Connection cable;1x User manual;1x Full-color packaging

Pixel Timer Remote Control Wireless TW-283/DC2 for Nikon

Rated 4.7/5 based on 11 customer reviews

5745 ar PVN

Piegādes laiks parasti 8 - 14 darba dienas

9712
4895152300513
Pixel

Jauns

07.04 - 26.04.2024
Saņemt veikalā
Bezmaksas
09.04 - 27.04.2024
Pakomāts (Omniva, DPD, Venipak)
3 €
09.04 - 27.04.2024
Kurjers (DPD, Omniva)
no 10 €
07.04 - 26.04.2024
Velokurjers (tikai Rīga)
no 7 €
SaderībaNikon
Pults savienojumsWireless
Timer funkcijaIr

Oriģinālais preces apraksts no ražotāja (oriģinālā valodā)

Pixel Timer Remote Control Wireless TW-283/DC2 for Nikon

The Pixel Timer Remote Control Wireless TW-283/DC2 allows you to trigger your Nikon camera wirelessly, up to a distance of more than 80 meters. So you no longer have to touch the shutter release button of your camera or even be near your camera!

This multifunctional set supports five different modes. For example, you can control your camera remotely for a single photo (Single shooting) or take a series of photos within 1 second (Continuous shooting). In addition, the TW-283/DC2 offers the BULB-shooting option, in which you determine the shutter speed yourself. If your camera supports long shutter speed photography, you have the option to hold down the button on the remote control so that the shutter opens. When you release the button, the shutter will close again. You can also set a timer. In this mode (Delay shooting) you can set the timer between 1 and 59 seconds, where you can also determine the number of photos (1 to 59 photos). Finally, you can set up a Timer schedule shooting, up to a maximum of 99 hours, 59 minutes and 59 seconds. You can also freely set the number of photos to be taken between 1-99, 1-999 or infinity.

The set consists of the transmitter TW-283TX and receiver TW-283RX. The transmitter has a comfortable grip and has an LCD screen. It displays the channel, battery status and selected mode. The transmitter sends a signal with a 2.4 gHz frequency, on up to 30 different channels. The maximum standby time is 1,000 hours for the transmitter and 400 hours for the receiver. Both the transmitter and receiver operate on two AAA batteries (not included). The receiver has a hotshoe adapter with 1/4" female thread. This allows you to mount it not only on your Nikon camera, but also on a tripod (see optional accessories).

This product is suitable for the following cameras:

If you have another camera, please contact us for a suitable product.

Usage Pixel TW-283/DC2 for Nikon

To use the remote control, insert the AAA batteries into the transmitter and receiver compartments. To use the remote control wirelessly, turn on the receiver. Then place the receiver on the hotshoe of your camera, or optionally on a tripod. You can also use the transmitter without the receiver, by attaching the transmitter to your camera using the supplied cable. In the clear menu of the transmitter you can easily determine the mode you want to use. The transmitter has an auto-shutdown function after 30 minutes; the receiver does not switch off automatically.

SaderībaNikon
Pults savienojumsWireless
Timer funkcijaIr

Uzdot jautājumu

Pasūti uzreiz


Available from warehouse