Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ

111917

Saramonic

Jauns

1 Vienība

Ir uz vietas


22945 ar PVN





The Saramonic Blink 500 B3 is an incredibly compact, lightweight, and professional sounding wireless microphone systems for the Apple iPhone and iPad. The included clip-on transmitter is small enough to clip directly to your shirt collar, and the included RXDi MFi Certified Lighting dual-channel receiver is so lightweight and unobtrusive that it won't get in your way at all. It can easily be used on devices that are mounted in handheld gimbals, and the receiver is even capable of accepting the signal from two microphones if you add another Blink 500 TX transmitter (sold separately).

Tiny body, huge sound.

The Blink 500 B3 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitter features an excellent sounding built-in microphone that captures voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. It also operates as a traditional bodypack transmitter with the included SR-M1 professional omnidirectional clip-on lavalier microphone, providing an even more professional and visually discreet miking solution. The sleek, featherweight RXDi receiver plugs directly into the Lightning port of your Apple device and doesn't require any batteries or charging to operate. There are no controls to fuss with, either. You just plug it in, and it works.

So advanced, it's effortless.

Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B3 is so technically advanced that it couldn't be easier to use. Even though there are no controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitter to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background with the Blink 500, letting you concentrate on storytelling and getting a great shot.

Perfect levels and power.

One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The transmitter's internal Lithium battery gets 5 hours of life from a charge with the included charging cables, and the USB-C port can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.

Handheld gimbal, meet wireless sound.

Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXDi receiver, included in your Blink 500 B3 kit changes this story. It's small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage, and if you add a second Blink 500 TX transmitter (sold separately) you can easily put mics on two separate people.

An ideal wireless system.

Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. This system is perfect for people who only need one wireless mic right now but may need the option to expand and use two in the future. If you shoot video with an iPhone and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. It's small enough to tuck away in a small pocket, so you can effortlessly bring the Blink 500 with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.

Transmitter Specifications:

  • Frequency: 2.4GHz
  • Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
  • RF Frequency Band: 2400 to 2483.5 MHz
  • RF Output Power: 10 mW
  • Signal to Noise Ratio: ≥70dB
  • Voice Delay: ≤6ms
  • Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
  • Audio Gain Control: 11dB, 18dB, 25dB
  • Plug-In Power: Yes, 1V
  • Distortion: ≤0.1%
  • Digital Resolution: 24-bit / 48kHz
  • Frequency Response: 20Hz to 16kHz
  • Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
  • Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
  • Antenna: Built-in 1/4λ Wire Antenna
  • Buttons: On / Off / Pair, Volume Up, Volume Down
  • Battery: Built-in Li-ion 3.7V / 400mAh
  • Approx. Battery Life: 5 hours
  • Charging Connector: USB Type-C (1.5 hours to be fully charged)
  • Input: 1/8'' (3.5mm) Microphone Input
  • Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
  • Microphone: Built-In Pressure Operated Electret Condenser
  • Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
  • Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
  • Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
  • Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
  • Mounting Clip: Built-In
  • Operating Temperature: 0℃ to 50℃
  • Storage Temperature: -20℃ to +50℃
  • Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
  • Weight: 1.2 oz (34g)

Receiver Specifications:

  • Frequency: 2.4GHz
  • Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
  • RF Frequency Band: 2400 to 2483.5 MHz
  • Signal to Noise Ratio: ≥70dB
  • Voice Delay: ≤6ms
  • Distortion: ≤0.1%
  • Digital Resolution: 24-bit / 48kHz
  • Frequency Response: 20Hz to 16kHz
  • Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
  • Antenna: Built-in 1/4λ Wire Antenna
  • Connector: MFi Certified Lighting Apple Lightning Male
  • Button: Pairing Pinhole Button
  • Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
  • Operating temperature: 0℃ to 50℃
  • Storage temperature: -20℃ to +50℃
  • Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
  • Weight: 0.35 oz (10g)

In the box:

  • 1 x Blink 500 TX Transmitter with Built-In Microphone and Clip
  • 1 x Blink 500 RXDi Dual-Receiver with MFi Certified Apple Lightning Connector
  • 1 x SR-M1 Omnidirectional Lavalier Microphone
  • 1 x Alligator-Style Lavalier Microphone Clip
  • 1 x Foam Lavalier Windscreen
  • 1 x 1’ (30.5 cm) gold-plated USB-C to USB-A charging cable
  • 1 x Pairing Pin

Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ

Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ

Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ

Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ

Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ

  • Konsultācijas, kā izvēlēties mikrofonu. Kurš mikrofons ir labāks?
  • Palīdzība izvēlēties mikrofonu no Saramonic, vai no citiem ražotājiem.
  • Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ mikrofona atsauksmes.
  • Paskaidrojumi par Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ mikrofona priekšrocībām, plusiem un minusiem.
  • Salīdzinam Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ ar citiem mikrofoniem.
  • Konsultācijas, kā pareizi rīkoties un labāk izmantot mikrofonu.
  • Individuālas apmācības, kā lietot mikrofonu.
  • Saramonic mikrofona sagatavošana darbam - konfigurācija, kalibrācija, programmatūras uzstāsīšana vai atjaunināšana.
  • Projektu, tāmes un iepirkuma dokumentu sagatavošana, kur ir iekļauti mikrofoni.
  • Nodrošinam Saramonic mikrofona remontu un piegādājam rezerves daļas priekš Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ.
  • Pasūtot Saramonic BLINK 500 B3 (TX+RX DI) 2.4GHZ no Saramonic ražotāja, tās piegādes laiks parasti ir 5 - 6 dienas.
More info

Uzdot jautājumu

Ātri pasūtīt



Nomas pieprasījums

Šī prece vēl nav mūsu nomas sortimentā, bet Tu vari ieteikt mums to pievienot nomai un, iespējams, kādreiz tā parādīsies nomas sarakstā!

:

:

:

: Ar šo es piekrītu saglabāt manu e-pastu Master Foto datu bāzē un saņemt ziņojumu, ja gadījumā šī prece būs pieejama nomā

Saistītie produkti