Glidecam Devin Graham Signature Series (GLDGSS) for cameras up to 5.4 kg

Glidecam X-10 Devin Graham Signature Series MTKit

Jointly developed by Glidecam and Devin Graham, the DEVIN GRAHAM Signature Series combines many of the features of our popular HD-Series with the high-end professional features normally found exclusively on the camera sleds of our more elaborate body-mounted systems.

The Glidecam DEVIN GRAHAM Signature Series, professional, hand-held camera stabilizer is the most rugged, and sophisticated, state-of-the-art Hand-held Camera Stabilizer ever produced and released by Glidecam.

The DEVIN GRAHAM Signature Series will transform your hard to watch, shaky camera footage into hypnotically smooth, professional footage. The DEVIN GRAHAM Signature Series works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs or traveling over rugged terrain. And when it comes to normal shooting, like walking or moving the camera slowly around someone, the results are equally magical.

Shot after shot, move after move, the Glidecam DEVIN GRAHAM Signature Series Stabilizer delivers beautifully smooth and professional results. With the Glidecam DEVIN GRAHAM Signature Series you no longer need a tripod or a dolly. All you need is your Imagination!

Glidecam DEVIN GRAHAM Camera Balance Platform
The precision, Camera Balance Platform (X-Y Head, or Top Stage) incorporates a quick-release, no-tools, slide-in Dovetail Camera Plate, Brass Alignment pin, Spring Loaded Quick Release Plate Lock, Push Button Quick Release that allows you to quickly attach or remove your camera. Ergonomic, fine-tuning, control knobs allow quick and precise adjustment of the Camera Balance Platform’s front-to-back and side-to-side movement. These controls allow you to quickly adjust the system’s horizontal balance.

Glidecam DEVIN GRAHAM Central Post
The Glidecam DEVIN GRAHAM Signature Series has a lightweight and rigid, no-tools, 1” diameter, Telescoping Center Post. For your convenience the Central Post has Guide Scale Markings for your Adjustable Knurled Three Axis Gimbal. The Telescoping Post features a safety stop to prevent the base from detaching from the Central Post.

Glidecam DEVIN GRAHAM Positionable Gimbal
A unique and proprietary, precision, no-tools, positionable Three-Axis Gimbal incorporates several adjustable, axis convergence controls. This allows all three axes to intersect for proper operational alignment. By changing the location of the Gimbal on the Central Post, you can quickly adjust the system’s vertical balance. This also allows for fast and easy setup of Low Mode operation.

Glidecam DEVIN GRAHAM Dynamic Base Platform
The unique and proprietary, Dynamic Base Platform is designed to manually expand or contract. This allows you to easily adjust the system’s dynamic balance, or to increase or decrease the system’s rotational pan inertia. The Glidecam DEVIN GRAHAM Signature Series Dynamic Base Platform has a 1/4" mounting hole for mounting a monitor.

Features:
- Designed for low profile cameras weighing from 2 to 12 pounds
- Includes Video Tutorial with Frequently Asked Questions, answered.
- Free, limited edition, custom fitting Product Bag (value: $89.95)
- Fine adjustment Dynamic Camera Balance Platform (Camera Mounting Platform)
- Integrated dovetail quick-release Camera Plate
- Adjustable convergence, precision, three-axis Gimbal
- No-tools, positionable knurled gimbal (positive twist lock)
- No-tools, Telescoping Center Post
- Laser engraved, central post guide scale markings.
- Adjustable dynamic balance and inertial-control Base Platform
- Includes 12 custom Counter Weight Plates
- Foam padded Handle Grip
- Precision Bearings at all vital points
- Made with precision Aluminum
- Anodized Studio Black
- Laser etched Labeling
- Allows unrestricted Booming and 360 degree Panning
- Rubber feet under Base Platform
- Camera Mounting Plate has 1/4" mounting screw.
- Base Platform has 1/4" mounting hole for optional LCD Monitor attachment
- 100% compatible with body-mounted stabilizers such as Smooth Shooter & X-10 series
- Payload range for cameras weighting 0.9 - 5.4 kg (GLDGSS)
- Engineered and Designed in Massachusetts, USA
- Made in the USA

In The Box
(1) Devin Graham Signature Series Stabilizer
(12) Counter Weight Plates
(1) Custom fitting Product Bag
(1) Video tutorial on USB Stick
(1) Hardware Set

Glidecam X-10 (GLX10) for cameras up to 4.5 kg
Professional Camera Stabilization System with two spring arms

The GLIDECAM X-10 is a highly advanced, professional Body-Mounted Camera Stabilization System designed to be used with specific Glidecam Hand-held Camera Stabilizers**. The GLIDECAM X-10 system will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake.

The GLIDECAM X-10 is very similar in design to the Glidecam Smooth Shooter; however the X-10 comes with both sections of its support arm being able to move vertically, whereas the Smooth Shooter comes with only the front section of its support arm being able to move vertically. Also, the X-10 comes with a trimmable Arm-to-Vest Connector, whereas the Smooth Shooter’s Arm-to-Vest Connector is not trimmable.

The GLIDECAM X-10 system works by isolating your body's motion from your camera, while your camera is balanced in a relatively motionless and isolated state. The GLIDECAM X-10'S Support Arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the Support Arm that isolates your motions from the camera in a way that creates smooth camera footage.

The GLIDECAM X-10 does not come with a Glidecam Hand-held Camera Stabilizer**; however, it is specifically designed to be used with them. If you already own one of our hand-held stabilizers, then you will be able to use it by simply attaching it to the end of the GLIDECAM X-10's Support Arm. None of our Glidecam Hand-held Camera Stabilizers** need to be modified to work with the GLIDECAM X-10. You can use your camcorder's flip out LCD monitor, or a monitor that is attached to the base of your Glidecam Hand-held Camera Stabilizer**. This allows for remote viewing of the camera's image without disturbing the orientation of the system.

When using the Glidecam Hand-held Camera Stabilizers** in hand-held mode, it is your arm that carries all of the weight. However, when the Glidecam Hand-held Camera Stabilizers** are used with the GLIDECAM X-10, it is the GLIDECAM X-10's Spring-loaded Support Arms that carry all of the weight. Because of this, you will now be able to shoot for extended periods of time, whereas before, the stress associated with hand-holding the weight reduced your shooting time.

The GLIDECAM X-10 is a highly developed and meticulously engineered camera stabilization system. Its ability to shoot smooth imagery within its weight range is extraordinary. It out performs all of the competition in its class, yet remains truly economical. The GLIDECAM X-10 is the realization of the need to stabilize lightweight cameras using the same degree of sophistication employed to stabilize heavy cameras. With the GLIDECAM X-10 you will be able to acquire the type of smooth footage you've always dreamed of.

**The Glidecam X-10 System is designed for use with the Glidecam XR-2000, XR-4000, HD-2000, HD-4000 and the DEVIN GRAHAM Signature Series Glidecam Hand-held Stabilizers. The weight plates provided with the Glidecam X-10 System are not compatible with the DEVIN GRAHAM Signature Series.

X-10 SUPPORT ARM
The GLIDECAM X-10’s Dyna-Elastic™ Dual-Articulating Support Arm incorporates 38 precision radial bearings within its machined T6 aluminum structure. The placement and implementation of these double-shielded bearings produce minimal friction and allow the Dyna-Elastic™ Support Arm to pivot and boom very smoothly, and with virtually no noise.

Four high-carbon alloy, Extension Springs are employed within the Support Arm’s hardcoat anodized Exo-Skeletal Shells. Utilizing Class Three Levers, the energy of the Extension Springs acts upon internal Fulcrum Points, and provides the Support Arm with its lifting power. The spring tension is field adjustable and allows for varying camera weights.

Our proprietary spring Inter-X-Change™ system makes the installation and removal of the springs quick and easy. The Support Arm can be setup and used in either a Two-Spring Mode, or a Four-Spring Mode. In the Two-Spring Mode, the Support Arm can hold a total combined camera and hand-held stabilizer weight of 9 pounds. In the Four-Spring Mode, the Support Arm can hold a total combined camera and hand-held stabilizer weight of 18 pounds.

A key design feature of the Support Arm is that it incorporates our Light-Force™ technology. This literally means that only a "light" force or effort is required by the operator to hold the arm at any given position, or to boom the arm up and down. It is this Light-Force™ feature that provides the operator with the optimum amount of camera buoyancy or float.

X-10 SUPPORT VEST
The Glidecam X-10 Support Vest is lightweight, comfortable and can be adjusted to fit a wide range of operators. High endurance, dual density, EVA foam padding and integral T6 aluminum alloy create a vest which can hold and evenly distribute the weight of the system across the operator's shoulders, back, and hips. For safety, quick release, high impact buckles allow the vest to be removed quickly. The Vest’s outer shell is made of 1000 denier cordura fabric, and 7-panel seat belt strapping, noted as being the best in the industry.

The Glidecam X-10 Support Vest incorporates a unique and proprietary Arm-to-Vest Connector that allows the angle of the Support Arm to be adjusted relative to the Support Vest. This Trimming Mechanism allows you to neutralize the weight of the Support Arm relative to your body’s center of gravity. When set correctly the effort required while shooting is greatly reduced. Another unique and proprietary feature of the Arm-to-Vest Connector is that it allows the Support Arm to be attached and removed from the Vest without affecting the operator’s selected trim settings.

In The Box
(1) X-10 Support Vest
(1) X-10 Support Arm
(1) Docking Bracket (only to hold the system)
(1) Aluminum Arm Post
(6) Steel Head Weight Plates
(1) Hardware and operations manual

Workshop
We offer for this product a two hour introduction workshop and also a one day trainings course. Please contact us to arrange a meeting or even get more information under 0049-6155-88777-66 or take a look in the accessory area of this product.

The Support Arm can be setup and configured so either a left-handed, or a right-handed operator can use the system

Dual Support Arm Boom Range

appr. 76,10 cm (30”)

Dual Support Arm Weight

appr. 2,6 kg (5 pounds 12 ounces) in Two Spring Mode, without arm posts.

Individual Weight Plates

each 366 grams (12.9oz)

Vest

Length

appr. 35,0 cm (13,78”)

Width

appr. 36,0 cm (14,17”)

Height min.

appr. 47,0 cm (18,5”)

Height max.

appr. 52,0 cm (20,47”)

Weight

appr. 2,2 kg (78.57 Oz)

Material

Codura

All measurements and weights approximate.