Беспроводные петличные микрофоны - SARAMONIC BLINK 500 B3 (TX+RX DI) 1 TO 1 - 2,4 GHz wirelss system for Lightning iPhone - купи


The Saramonic Blink 500 B3 is an incredibly compact, lightweight, and professional sounding wireless microphone systems for the Apple iPhone and iPad. The included clip-on transmitter is small enough to clip directly to your shirt collar, and the included RXDi MFi Certified Lighting dual-channel receiver is so lightweight and unobtrusive that it won't get in your way at all. It can easily be used on devices that are mounted in handheld gimbals, and the receiver is even capable of accepting the signal from two microphones if you add another Blink 500 TX transmitter (sold separately).

Product Video
 
 

SARAMONIC BLINK 500 B3 (TX+RX DI) 1 TO 1 - 2,4 GHz wirelss system for Lightning iPhone

Rated 4.7/5 based on 11 customer reviews

12545 с НДС

Поставка обычно в течении 4 - 5 рабочих дней

39365
BLINK 500 B3
6971008024531
Saramonic

Новое

03.04 - 10.04.2024
Забрать в магазине
Бесплатно
04.04 - 11.04.2024
Пакомат (Omniva, DPD, Venipak)
3 €
04.04 - 11.04.2024
Курьер (DPD, Omniva)
от 10 €
03.04 - 10.04.2024
Велокурьер (только в Риге)
от 7 €

The Saramonic Blink 500 B3 is an incredibly compact, lightweight, and professional sounding wireless microphone systems for the Apple iPhone and iPad. The included clip-on transmitter is small enough to clip directly to your shirt collar, and the included RXDi MFi Certified Lighting dual-channel receiver is so lightweight and unobtrusive that it won't get in your way at all. It can easily be used on devices that are mounted in handheld gimbals, and the receiver is even capable of accepting the signal from two microphones if you add another Blink 500 TX transmitter (sold separately).

Tiny body, huge sound.

The Blink 500 B3 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitter features an excellent sounding built-in microphone that captures voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. It also operates as a traditional bodypack transmitter with the included SR-M1 professional omnidirectional clip-on lavalier microphone, providing an even more professional and visually discreet miking solution. The sleek, featherweight RXDi receiver plugs directly into the Lightning port of your Apple device and doesn't require any batteries or charging to operate. There are no controls to fuss with, either. You just plug it in, and it works.

So advanced, it's effortless.

Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B3 is so technically advanced that it couldn't be easier to use. Even though there are no controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitter to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background with the Blink 500, letting you concentrate on storytelling and getting a great shot.

Perfect levels and power.

One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The transmitter's internal Lithium battery gets 5 hours of life from a charge with the included charging cables, and the USB-C port can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.

Handheld gimbal, meet wireless sound.

Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXDi receiver, included in your Blink 500 B3 kit changes this story. It's small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage, and if you add a second Blink 500 TX transmitter (sold separately) you can easily put mics on two separate people.

An ideal wireless system.

Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. This system is perfect for people who only need one wireless mic right now but may need the option to expand and use two in the future. If you shoot video with an iPhone and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. It's small enough to tuck away in a small pocket, so you can effortlessly bring the Blink 500 with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.

Transmitter Specifications:

  • Frequency: 2.4GHz
  • Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
  • RF Frequency Band: 2400 to 2483.5 MHz
  • RF Output Power: 10 mW
  • Signal to Noise Ratio: ≥70dB
  • Voice Delay: ≤6ms
  • Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
  • Audio Gain Control: 11dB, 18dB, 25dB
  • Plug-In Power: Yes, 1V
  • Distortion: ≤0.1%
  • Digital Resolution: 24-bit / 48kHz
  • Frequency Response: 20Hz to 16kHz
  • Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
  • Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
  • Antenna: Built-in 1/4λ Wire Antenna
  • Buttons: On / Off / Pair, Volume Up, Volume Down
  • Battery: Built-in Li-ion 3.7V / 400mAh
  • Approx. Battery Life: 5 hours
  • Charging Connector: USB Type-C (1.5 hours to be fully charged)
  • Input: 1/8'' (3.5mm) Microphone Input
  • Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
  • Microphone: Built-In Pressure Operated Electret Condenser
  • Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
  • Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
  • Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
  • Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
  • Mounting Clip: Built-In
  • Operating Temperature: 0℃ to 50℃
  • Storage Temperature: -20℃ to +50℃
  • Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
  • Weight: 1.2 oz (34g)

Receiver Specifications:

  • Frequency: 2.4GHz
  • Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
  • RF Frequency Band: 2400 to 2483.5 MHz
  • Signal to Noise Ratio: ≥70dB
  • Voice Delay: ≤6ms
  • Distortion: ≤0.1%
  • Digital Resolution: 24-bit / 48kHz
  • Frequency Response: 20Hz to 16kHz
  • Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
  • Antenna: Built-in 1/4λ Wire Antenna
  • Connector: MFi Certified Lighting Apple Lightning Male
  • Button: Pairing Pinhole Button
  • Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
  • Operating temperature: 0℃ to 50℃
  • Storage temperature: -20℃ to +50℃
  • Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
  • Weight: 0.35 oz (10g)

In the box:

  • 1 x Blink 500 TX Transmitter with Built-In Microphone and Clip
  • 1 x Blink 500 RXDi Dual-Receiver with MFi Certified Apple Lightning Connector
  • 1 x SR-M1 Omnidirectional Lavalier Microphone
  • 1 x Alligator-Style Lavalier Microphone Clip
  • 1 x Foam Lavalier Windscreen
  • 1 x 1’ (30.5 cm) gold-plated USB-C to USB-A charging cable
  • 1 x Pairing Pin

The Saramonic Blink 500 B3 is an incredibly compact, lightweight, and easy-to-use wireless microphone system for Apple iPhone and iPad that provides broadcast-quality sound.

The RXDi battery-free MFi certified Lightning receiver is extremely lightweight, space efficient and works perfectly when used in handheld gimbals. The clip-on transmitter has a great sounding built-in mic and it’s small and light enough to clip to shirts and clothing, or you can use the included SR-M1 professional lavalier microphone.

It comes with one dual-channel receiver that plugs into the Lightning port of your device and one transmitter. You can add a second transmitter (sold separately) to put mics on two people.

Features:
  • Ultracompact wireless microphone system for iOS devices
  • Dual-Channel and battery-free Lightning receiver
  • For mobile video production, vlogging, journalism & more
  • Deliver crystal-clear professional sound quality
Delivery Content:
  • 1× Blink500 RXDi Receiver with MFi Certified Apple Lightning Connector
  • 1× Blink500 TX Transmitter with Built-In Microphone and Clip
  • 1× SR-M1 Omnidirectional Lavalier Microphone
  • 1× Alligator-Style Lavalier Microphone Clip
  • 1× Foam Lavalier Windscreen
  • 1× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cable
  • 1× Pairing Pin
  • 1× Warranty Card
  • 1× User Manual

Technical Specifications

Blink500 RXDi
Transmission Type
2.4GHz Digital Frequency
Modulation
GFSK
Audio Output Connector
MFi Certified Lightning Connector
Operating Range
Up to 164′ (50m)
Power Requirements
Supplied by iOS Device
Antenna
PIFA Antenna
Weight
Approx. 11g (0.38oz)
Dimensions
76×16.5×11mm
Operating Temperature
0°C to 50°C
Storage Temperature
–20°C to +55°C
Blink500 TX
Transmission Type
2.4GHz Digital Frequency
Modulation
GFSK
Operating Range
Up to 164′ (50m)
RF Output Power
10mW
Polar Pattern
Omnidirectional
Frequency Response
50Hz-18KHz
Maximum SPL
Built-in Microphone 120dB SPL; Lavalier Microphone 110dB SPL
Sensitivity
Built-in Microphone -42dB; Lavalier Microphone -30dB
SNR
>78dB
Power Requirements
Built-in Li-ion Battery or USB-C DC 5V
Built-in Battery Life
Approx. 6 hours
Antenna
PIFA Antenna
Audio Inputs
3.5mm TRS Lavalier Microphone Input or Built-in  Microphone
Weight
Approx. 34g (1.2oz)
Dimensions
63×43×16.5mm
Operating Temperature
0°C to 50°C
Storage Temperature
–20°C to +55°C
Вид продуктаPiespraužamie mikrofoni
МикрофоныПетлички
Соединение микрофонабеспроводные
Соединительный штекерLightning

Задать вопрос

Быстрый заказ


Available from warehouse