Штативы для фотоаппаратов - Benro GA258F foto statīvs + IB2 - быстрый заказ от производителя
Previous Next

Benro GA258F foto statīvs + IB2

Rated 3.9/5 based on 1 customer reviews

с НДС

Этот продукт в настоящее время недоступен для заказа, пожалуйста, проверьте позже.

42604
Benro

Новое

Tripod legs:

  • Load Capacity: 26.5 lb
  • Max Height: 70.3"
  • Min Height: 18.5"
  • Folded Length: 25.8"
  • Leg Sections: 4
  • Weight: 5.2 lb
  • Quick Flip 90° Center Column
  • Leg and Center Column Convert to Monopod
  • Flip Locks, Spiked Feet, Carrying Case

Support up to 26.5 lb with the GA258FB2 GoClassic Aluminum Tripod with B2 Ball Head from Benro. The GA258FB2 can extend from a minimum height of 14.6" up to 70.3". The 4-section legs are secured with flip locks and can be independently adjusted in both height and leg angle. The legs fold down to a length of 25.8".

The B2 Double Action Ball Head has a dual action design featuring separate knobs for the panning adjustment and ball movement. It can hold up to 44 lb, and weighs just 1 lb. The quick-release clamp is Arca-type compatible, and a QR plate is included with the head.

Built-In Monopod

One of the tripod's legs can be detached and paired with the center column to produce a full-size monopod.

90° Center Column

The Quick Flip 90° center column can quickly go from vertical to horizontal without the use of any tools.

Quick Lock Legs with Anti-Rotation Leg System

Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up.

Rubber and Spiked Feet

The GA258F is equipped with interchangeable screw-in rubber feet and stainless steel spiked feet.

Foam Grip

A thick layer of closed-cell nitrile butadiene rubber (NBR) provides a comfortable grip when carrying your tripod.

Reversible Center Column

The center column, which features a ridge-and-groove design to eliminate unwanted column rotation, can be quickly inverted for exacting, lower angle camera positioning.

Carrying Case

An included durable case with a shoulder strap provides protection and transport for your tripod.

Multi-Position Leg Angles

The tripod legs can be independently locked into place at different angles to enable shooting in cramped quarters, on irregular surface areas, or at ground level. A short center column is included.

SystemGo Accessories

With the center column in the horizontal orientation and the addition of one or two GoCouplers, you can mount one or two cameras, a digital workstation, or a slider to the tripod.
MaterialAluminum
Load Capacity26.5 lb (12 kg)
Maximum HeightTripod: 70.3" (178.5 cm)
Monopod: 73.6" (178.5 cm)
Maximum Height w/o Column Extended59.3" (150.5 cm)
Minimum Height18.5" (47 cm)
Folded Length25.8" (65.5 cm)
Weight5.2 lb (2.4 kg)
Center Column
Center Column TypeRapid, faceted, 90°, reversible
Center Column Sections1, short center column included
Center BraceNo
Head Mount Thread Size3/8"-16
Legs

Yes

Leg Sections4
Independent Leg SpreadYes
Leg Lock TypeFlip
Spiked Feet



Tripod head IB2

  • Load Capacity: 22 lb
  • Max Height: 3.9"
  • Weight: 14.5 oz
  • Arca-Type Compatible
  • 360° Panning
  • Friction Control
  • Bubble Level
  • 90° Portrait Notch


The IB2 Triple Action Ball Head from Benro is an Arca-type compatible head with a load capacity of 22 lb. It stands 3.9" high, and weighs 14.5 oz. There are separate locks for both the ball movement and the 360° panning motion, as well as a friction control knob. A 90° notch makes it easy to switch to portrait orientation. The numbered scale on the head's base allows for easily repeatable pans, and a bull's eye bubble helps ensure they head is level with the horizon.

Комплектация штативас головой

Задать вопрос

Быстрый заказ


This product is currently not available for order, please check later.