Yongnuo YN-622TX-N TTL LCD zipsuldzes raidītāis

с НДС

Этот продукт в настоящее время недоступен для заказа, пожалуйста, проверьте позже.



YN021
6947110919102
YN-622TX-N
YongNuo

Новое


Radio trigger YONGNUO yn-TX-622N LCD is compatible with YN-622N wireless flash system. The radio transmission is based on 2.4GHz and works for up to 100m. It can work in 7 channels.

Подробнее


Radio trigger YONGNUO yn-TX-622N LCD is compatible with YN-622N wireless flash system. The radio transmission is based on 2.4GHz and works for up to 100m. It can work in 7 channels.
The large LCD display and buttons well placed unsure comfortable and intuitive work. The device has got a USB port That will allow future firmware updates. It is mounted on the hot shoe of the camera. There are 3 possible modes: i-TTL and Manual Sync Syper.

Specification:
- compatible with Yongnuo YN-622N
-
LCD display - 2.4Ghz
- up to 100m range
- updating firmware possibile
- front or rear curtain sync
-
7 channels - 3 possible modes: i-TTL and Manual Sync Syper
- modeling flash
- HSS < br />

Yongnuo YN622-blue. This set consisting of radio control TTL Yongnuo TX-622N and 622N-YN trigger. Yongnuo TX-622N is a wireless 2.4 GHz radio controller allows complete control over the flashes i-TTL triggers connected to the YN-622N. Coded transmission ensures effective range without interference up to 100 m. The machine LCD for comfortable changing parameters. In addition, support has an LED work autofocusu. Yongnuo YN-622N is one of the most advanced radio triggers for system lamps (remote support features TTL) and studio lighting. It enables remote control of individual lamps or groups of lamps. With the range of 2.4 GHz, the extent of operation reaches 100 m. The controller can operate in the radio transmission channels 7, Flashes can be divided into three independently controlled groups. Thanks to this work, even with plenty of lamps will be comfortable. The unit is mounted directly on the hot shoe camera or line synchronization, it is additionally equipped with a PC terminal. Responsible for supply two batteries or rechargeable AA. Yongnuo TX-622N enables the lamp or group of lamps in the automatic mode, the i-TTL mode, Super Sync or manual. It allows you to set the amount of flash, EV adjustment, and change the zoom flash, triggering flash on the front and rear curtain, and supports modeling flash. The controller has a USB port to update the internal software (downloadable from the manufacturer's website). Radio Trigger YN-622N is well suited to the hands of a professional, due to full functionality. Satisfy the amateurs thanks to easy handling. Exceptional utility device will be used in an advanced photo studio, or when reportage outdoor session. Each device YN-622 can operate both as a transmitter and the receiver. It has an easy control, and indicator lights, to facilitate the control of the groups of lamps. The big advantage is the reliability of operation, and high quality with a metal foot. The set includes two devices, but it is possible to re-buy and work with any number of devices (for more advanced systems). Specification controller Yongnuo 622N-TX: compatibility with Yongnuo YN-622N synchronization to 1/250 s (Auto FP 1/8000 sec) 3 groups Units A, B, C backlit LCD coded transmission 2.4GHz 7 channels Supports i-TTL can synchronize lamp for a very short time (up to 1 / 8000s) in an HSS, the ability to synchronize to 1, 2 curtain, support for FEC, FEB, FEL, zoom, flashes modeling, triggered by the PC connection, the LED support autofocus operation.
Yongnuo YN622-blue. This set consisting of radio control TTL Yongnuo TX-622N and 622N-YN trigger.
Yongnuo TX-622N is a wireless 2.4 GHz radio controller allows complete control over the flashes i-TTL triggers connected to the YN-622N. Coded transmission ensures effective range without interference up to 100 m. The machine LCD for comfortable changing parameters. In addition, support has an LED work autofocusu.
Yongnuo YN-622N is one of the most advanced radio triggers for system lamps (remote support features TTL) and studio lighting. It enables remote control of individual lamps or groups of lamps. With the range of 2.4 GHz, the extent of operation reaches 100 m.
radio controller 7 may operate in transmission channels, flash can be divided into three independently controlled groups. Thanks to this work, even with plenty of lamps will be comfortable. The unit is mounted directly on the hot shoe camera or line synchronization, it is additionally equipped with a PC terminal. Responsible for supply two batteries or rechargeable AA. Yongnuo TX-622N enables the lamp or group of lamps in the automatic mode, the i-TTL mode, Super Sync or manual. It allows you to set the flash output, EV correction and change the zoom flash, triggering flash on the front and rear curtain, and supports modeling flash. The controller has a USB port to update the internal software (downloadable from the manufacturer's website).
trigger radio YN-622N is suited hands of a professional, due to full functionality. Satisfy the amateurs thanks to easy handling. Exceptional utility device will be used in an advanced photo studio, or when reportage outdoor session.
Each device YN-622 can operate both as a transmitter and the receiver. It has an easy control, and indicator lights, to facilitate the control of the groups of lamps. The big advantage is the reliability of operation, and high quality with a metal foot.
The set includes two devices, but it is possible to re-buy and work with any number of devices (for more advanced systems).

Specification controller Yongnuo 622N-TX
compatibility Yongnuo YN-622N synchronization to 1/250 s (Auto FP 1/8000 sec) 3 groups Units A, B, C big, backlit LCD coded transmission 2.4GHz 7 channel operation modes: i-TTL Syper Sync, Manual YN622N Yongnuo TTL trigger TTL 2.4GHz radio system for Nikon E-TTL II / E-TTL 2x transmitter-receiver, range up to 100m < br /> Specifications trigger YN-622N
frequency: 2.4 GHz, the power of channels 7: 2x AA (each device) connectors flash PC and shoe AF-assist illuminator dedication TTL functions: Nikon
YN622N trigger functions:
full support E-TTL / E-TTL II system Nikon, work in TTL, Multi manual, the possibility of wireless control of lamps from the camera (for selected models of Nikon cameras ), the ability to manage lamps divided into groups of channels (3 groups of 7 channels), the cooperation of lamp system and the studio (or combinations of these two types of lamps), the ability to synchronize lamp for a very short time (up to 1 / 8000s) in an HSS , the ability to synchronize the 1, 2 curtain, support for FEC, FEB, FEL, zoom, flashes modeling, triggering the PC interface, the LED autofocus assist job.

work in TTL, Multi manual, the possibility of wireless control of lamps from the camera (for selected models of Nikon cameras), the ability to manage lamps divided into groups and channels (3 groups, 7 channels), cooperation with lamps system and studio (or combinations of these two types of lamps), the ability to synchronize lamp for a very short time (up to 1 / 8000s) in an HSS, the ability to synchronize to 1, 2 curtain, support for FEC, FEB, FEL, zoom, flashes modeling, triggering of the PC interface. LED autofocus assist job.

work in TTL, Multi manual, the possibility of wireless control of lamps from the camera (for selected models of Nikon cameras), the ability to manage lamps divided into groups and channels (3 groups, 7 channels), cooperation with lamps system and studio (or combinations of these two types of lamps), the ability to synchronize lamp for a very short time (up to 1 / 8000s) in an HSS, the ability to synchronize to 1, 2 curtain, support for FEC, FEB, FEL, zoom, flashes modeling, triggering of the PC interface. LED autofocus assist job.

cooperation with the lamp system and the studio (or combinations of these two types of lamps), the ability to synchronize lamp for a very short time (up to 1 / 8000s) in an HSS, the ability to synchronize to 1, 2 curtain, support for FEC, FEB, FEL, zoom, flashes modeling, triggering the PC interface, the LED autofocus assist job.

cooperation with the lamp system and the studio (or combinations of these two types of lamps), the ability to synchronize lamp for a very short time (up to 1 / 8000s) in an HSS, the ability to synchronize to 1, 2 curtain, support for FEC, FEB, FEL, zoom, flashes modeling, triggering the PC interface, the LED autofocus assist job.


Radio trigger YONGNUO yn-TX-622N LCD is compatible with YN-622N wireless flash system. The radio transmission is based on 2.4GHz and works for up to 100m. It can work in 7 channels.
The large LCD display and buttons well placed unsure comfortable and intuitive work. The device has got a USB port That will allow future firmware updates. It is mounted on the hot shoe of the camera. There are 3 possible modes: i-TTL and Manual Sync Syper.

Specification:
- compatible with Yongnuo YN-622N
-
LCD display - 2.4Ghz
- up to 100m range
- updating firmware possibile
- front or rear curtain sync
-
7 channels - 3 possible modes: i-TTL and Manual Sync Syper
- modeling flash
- HSS < br />
Radio trigger YONGNUO yn-TX-622N LCD is compatible with YN-622N wireless flash system. The radio transmission is based on 2.4GHz and works for up to 100m. It can work in 7 channels.
The large LCD display and buttons well placed unsure comfortable and intuitive work. The device has got a USB port That will allow future firmware updates. It is mounted on the hot shoe of the camera. There are 3 possible modes: i-TTL and Manual Sync Syper.

Specification:
- compatible with Yongnuo YN-622N
-
LCD display - 2.4Ghz
- up to 100m range
- updating firmware possibile
- front or rear curtain sync
-
7 channels - 3 possible modes: i-TTL and Manual Sync Syper
- modeling flash
- HSS < br />
Radio trigger YONGNUO yn-TX-622N LCD is compatible with YN-622N wireless flash system. The radio transmission is based on 2.4GHz and works for up to 100m. It can work in 7 channels.
The large LCD display and buttons well placed unsure comfortable and intuitive work. The device has got a USB port That will allow future firmware updates. It is mounted on the hot shoe of the camera. There are 3 possible modes: i-TTL and Manual Sync Syper.

Specification:
- compatible with Yongnuo YN-622N
-
LCD display - 2.4Ghz
- up to 100m range
- updating firmware possibile
- front or rear curtain sync
-
7 channels - 3 possible modes: i-TTL and Manual Sync Syper
- modeling flash
- HSS < br />
ТриггерыДля накамерных вспышек
Триггер для камерNikon
Вид триггераraidītājs
Группа товараRadio palaidēji

Задать вопрос

Быстрый заказ


This product is currently not available for order, please check later.



:
Отметив галочку, я соглашаюсь оставить свой е-майл в базе данных Master Foto и получить сообщение, если это оборудование станет доступно.

:



Похожие продукты