Benro A3883TS6PRO video statīvs ar galvu

Rated 4.7/5 based on 11 customer reviews

36645 с НДС

В наличии
2 шт. , в магазине, ул. Ф.Садовникова 39

42192
6931747313044
Benro

Новое

возможно после 29.03.2024
Забрать в магазине
Бесплатно
возможно после 30.03.2024
Курьер (DPD, Omniva)
от 10 €
возможно после 29.03.2024
Велокурьер (только в Риге)
от 7 €
366.45
Лизинг. калькулятор
Период
3
6
12
24
36
Первый взнос,
В месяц,
no 

The A3883 Reverse-Folding Aluminum Travel Tripod with S6Pro Fluid Video Head from Benro features a highly compact travel tripod that can be converted to a monopod, and a compact fluid head with a 65mm flat base that allows moving the head directly to most sliders, jibs, and other support gear. The head supports up to 13.2 lb loads and offers 5+0 steps of counterbalance.

The tripod has a center column with a leveling adapter on the end that allows you to adjust the angle of the fluid head without having to readjust the tripod legs. The combination of the reverse-folding design and center column allows the tripod to have a max height of 72" (with the head attached) while being able to fold to a very compact size. Furthermore, the tripod legs are able to spread wide to provide a low-angle minimum height of only 13.4" (also with the head attached). With rubber feet and spikes underneath them, the tripod can be used on virtually all surfaces. To convert it to a monopod, the center column is used as the core component. One of the legs of the tripod unscrews from the tripod and secures to the center column, and together the two form a fully functioning monopod.

The S6Pro head features continuous pan and tilt drag and has independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°. Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal.

A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it too far in either direction. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

S6Pro Fluid Head

  • 13.2 lb payload
  • 65mm flat base with a 3/8"-16 thread
  • Can also be mounted directly on most sliders, jibs, and monopods
  • 5+0 steps of counterbalance
  • Continuous pan and tilt drag
  • Independent pan and tilt locks
  • +90/-75° tilt range
  • 360° pan range
  • Made of magnesium and aluminum
  • Rosette adapters on the left and right side for attaching the included pan bar
  • Sliding camera plate with safety lock
  • 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
  • Two 1/4"-20 threaded holes for accessories

A3883 Tripod

  • Reverse-folding travel tripod with a center column and leveling adapter
  • Convertible to a monopod with one of the tripod legs unscrewed and secured to the center column
  • Maximum height of 72" with the S6Pro attached
  • Low-angle minimum height of 13.4"
  • Spiked and rubber feet
  • Twist leg locks
  • Aluminum construction
  • Camera Plate

Camera Plate Features

Sliding Balance Plate

Camera Mounting Screw

1 x 1/4"-20 Male
1 x 3/8"-16 Male

Safety Lock

Yes

  • Head

Base Mount

3/8"-16 Female

Counter Balance

Incremental 5-Step Plus 0

Pan Handle Fittings

2 x Rosette

Bubble Level

1 x Illuminated

Accessory Mounting

2 x 1/4"-20 Female Thread

Base Diameter

2.56" / 65 mm

  • Pan & Tilt

Drag Control

Pan: Continuous
Tilt: Continuous

Drag Type

Fluid

Vertical Tilt

+90° to -75°

Panning Range

360°

Independent Pan Lock

Yes

Independent Tilt Lock

Yes

  • Legs

Leg Lock Type

Twist Lock

Leg Sections

4

Feet Features

Rubber, Spiked

Spreader

None

  • Center Column

Center Column Features

Leveling, 3/8"-16 Female Accessory Mount

  • General

Load Capacity

13.2 lb / 5.99 kg

Maximum Working Height

72" / 182.88 cm

Max Height without Center Column

57.4" / 145.80 cm

Minimum Working Height

13.4" / 34.04 cm

Materials

Aluminum, Magnesium

Weight

9 lb / 4.08 kg

Как купить товар в лизинг?

  • 1. Оцените свои возможности.
  • 2a. Если вы хотите купить только один товар в лизинг через Aizdevums.lv, то заполните заявку тут
  • 2b. Если вы хотите купить несколько товаров или воспользоваться услугами другой лизинговой компании, то положите товары в корзину и выберите услугу лизинга при оформлении заказа.
    Мы предлагаем лизинг от Aizdevums SIA, Incredit SIA, ESTO.
    Консультанты проверят наличие товаров в корзине и отправят ссылку на кредитную заявку.
  • 3. Если вы получили положительный ответ, свяжитесь с нами, чтобы приобрести товар. Консультанты проверят наличие товара.
  • 4. Если товар есть в магазине или его нужно заказать со склада и вы получили утвердительный ответ от наших консультантов, приходите к нам в магазин для оформления документов покупки.
  • 4a. Вы также можете попросить нас выставить счет на данную продукцию и обратиться в одно из отделений лизингодателя для оформления лизинговых документов *.
  • 5. После оформления лизинговых документов вы можете отправиться за товаром в магазин, если он есть на месте или сообщить нашим консультантам и они закажут его со склада.
  • *Возможна организация доставки арендованного товара, поэтому вы также можете осуществить весь процесс покупки удаленно.
    **Последовательность этапов аренды такая же, как и для договоров аренды, предлагаемых InCredit Group.
    ***В случае сомнений обращайтесь к нашим консультантам!

    Пользуясь лизинговыми услугами, внимательно оцените свои варианты погашения кредита!
  • Оформить лизинг

Задать вопрос

Быстрый заказ


В наличии
2 шт.