Вспышки на камеру - Yongnuo YN-565CII zibspuldze Canon - купить сегодня в магазине и с доставкой


Yongnuo YN565EX III is the third installment of one of the most popular flash Yongnuo brand on offer, designed to work with Canon cameras. High power, numerous features and remote control make it an essential tool in every photographer's bag.

Yongnuo YN-565CII zibspuldze Canon

Rated 4.7/5 based on 11 customer reviews

12945 с НДС

В наличии
1 товар , в магазине, ул. Ф.Садовникова 39

28521
YN-565C II
6947110911038
YongNuo

Новое

28.03.2024
Забрать в магазине
Бесплатно
29.03.2024
Пакомат (Omniva, DPD, Venipak)
3 €
29.03.2024
Курьер (DPD, Omniva)
от 10 €
28.03.2024
Велокурьер (только в Риге)
от 7 €

Yongnuo YN565EX III is the third installment of one of the most popular flash Yongnuo brand on offer, designed to work with Canon cameras. High power, numerous features and remote control make it an essential tool in every photographer's bag.
Powerful and precise control lamp
reporter YN565EX III Canon cameras features high guide number flash GN of 58. high power flash in conjunction with a wide range of adjustment (in a range from 1/1 to 1/128, with 1/3 EV step) allows precise selection of the correct value to the existing scene.

modes lamp offers three operating modes: manual, automatic and strobe E-TTL, through which the user can easily achieve the desired effect.
- Manual mode (M) gives the user complete control over the parameters of the lamp. In manual mode, the power level is set manually by the user.
- strobe mode (Multi) allows you to perform a series of flashes in a single exposure, so you can make creative photographs showing the movement in the scene.
- Automatic mode (E-TTL) will work perfectly wherever time plays an important role, eg. in the course of reportage, weddings, etc. in this mode, the lamp in cooperation with the camera adjusts the flash output based on information collected from the flash of the measurement. Many methods

trigger version III journalistic flash Yongnuo YN565EX can be triggered in many ways.
- Foot ISO - lamp attached with a hot shoe on the sled directly camera or release radio bearers.
- PC interface - using a traditional cable connector PC sync.
- The optical flash control with the transfer of automation, lamps compatible with Canon and Nikon (Sn and Sc)
- Traditional triggering flash (modes S1 and S2), or the use of photocell reacts to the first flash another flash (S1) or additionally intelligent omitting pre-flash measurement of another lamp (S2).
Flash compensation (FEC)
is a function which allows to influence the strength of the flash operating in automatic mode, E-TTL. After setting the compensation of all the flashes will be performed with the correction power, so as to help achieve the desired effect by the photographer. For example, the FEC set at -1 EV will reduce power flashes so that illuminated the topic was underexposed by 1 exposure.
FV Bracketing (FEB)
Bracket FV tool is useful especially in situations in which the scene lighting changes rapidly, or where the user is not sure of what power to illuminate the frame. Bracket setting makes three consecutive flashes of the lamp will be executed with different power (eg. Underexposed image, properly lit, overexposed). This feature increases the likelihood of correctly exposed images in challenging lighting conditions.
Sync on the first or second curtain.
Mode enables creative use of flash effect at the beginning or end of the exposure. Lamp reporter YN565EX III offers flash synchronization with both the first (early exposure) and the second curtain (end of exposure), allowing you to significantly change the nature of the received images. Liberation second curtain flash allows you to capture the effect of motion for an object, for example. Streaking for the vehicle occupants. In the case of flashes on the first curtain blur zastanemu registered by the light in front of the moving object in the scene.
direction and angle of flash - light of different nature
solutions implemented in the lamp reporter Yongnuo III YN565EX allow free formation nature of the emitted light in a split second. Moving burner with automatic (and manual) zoom, diffuser and reflector enable creative selection of the selected scene lighting.
continuous readiness to work
used in flash systems allow to shorten the time between two discharges (at full output power and a base) for only 2 seconds, so that the device provides near-continuous readiness for operation.

Universal supply primary power source for the flash Yongnuo YN565EX III are four cells (batteries) AA. Compatible with universal cell, commonly available in stores around the world that makes the lamp can operate virtually anywhere. Additionally, to optimize the lamp is equipped with the power saving function, which in the case of a long inactivity automatically switches off the lamp.
High-performance
To further improve the performance of the device can be connected to an external water on him or battery power bank for example. YN52000. Additional external power source reduces the time between flashes, and extend the operating time without having to replace batteries.

IA Assistant Front-assist illuminator lamp operation auto-focus system makes it easy to capture perfectly sharp pictures in low light conditions. < br />
Easy to control Easy to read, backlit LCD display and intuitive and feature-rich menus make it easy to navigate the functions of the lamp, and large and comfortable buttons for ease of use even when wearing gloves. You can also enable and disable signal to indicate the charge and ready to re-flash. In cooperation with newer Canon cameras is available control parameters flash from the camera.

Long service components flash YN565EX III made of high quality materials to ensure long life. Advanced system protects the device from overheating. In case of detection of high temperature equipment protection mechanism notifies the user, and then reduce the available functions, thus protecting the lamp against damage.

Full compatibility Mini USB port for updating software ensures compatibility with flash new models of cameras.



Yongnuo YN565EX III is the third installment of one of the most popular flash Yongnuo brand on offer, designed to work with Canon cameras. High power, numerous features and remote control make it an essential tool in every photographer's bag.
Powerful and precise control lamp
reporter YN565EX III Canon cameras features high guide number flash GN of 58. high power flash in conjunction with a wide range of adjustment (in a range from 1/1 to 1/128, with 1/3 EV step) allows precise selection of the correct value to the existing scene.

modes lamp offers three operating modes: manual, automatic and strobe E-TTL, through which the user can easily achieve the desired effect.
- Manual mode (M) gives the user complete control over the parameters of the lamp. In manual mode, the power level is set manually by the user.
- strobe mode (Multi) allows you to perform a series of flashes in a single exposure, so you can make creative photographs showing the movement in the scene.
- Automatic mode (E-TTL) will work perfectly wherever time plays an important role, eg. in the course of reportage, weddings, etc. in this mode, the lamp in cooperation with the camera adjusts the flash output based on information collected from the flash of the measurement. Many methods

trigger version III journalistic flash Yongnuo YN565EX can be triggered in many ways.
- Foot ISO - lamp attached with a hot shoe on the sled directly camera or release radio bearers.
- PC interface - using a traditional cable connector PC sync.
- The optical flash control with the transfer of automation, lamps compatible with Canon and Nikon (Sn and Sc)
- Traditional triggering flash (modes S1 and S2), or the use of photocell reacts to the first flash another flash (S1) or additionally intelligent omitting pre-flash measurement of another lamp (S2).
Flash compensation (FEC)
is a function which allows to influence the strength of the flash operating in automatic mode, E-TTL. After setting the compensation of all the flashes will be performed with the correction power, so as to help achieve the desired effect by the photographer. For example, the FEC set at -1 EV will reduce power flashes so that illuminated the topic was underexposed by 1 exposure.
FV Bracketing (FEB)
Bracket FV tool is useful especially in situations in which the scene lighting changes rapidly, or where the user is not sure of what power to illuminate the frame. Bracket setting makes three consecutive flashes of the lamp will be executed with different power (eg. Underexposed image, properly lit, overexposed). This feature increases the likelihood of correctly exposed images in challenging lighting conditions.
Sync on the first or second curtain.
Mode enables creative use of flash effect at the beginning or end of the exposure. Lamp reporter YN565EX III offers flash synchronization with both the first (early exposure) and the second curtain (end of exposure), allowing you to significantly change the nature of the received images. Liberation second curtain flash allows you to capture the effect of motion for an object, for example. Streaking for the vehicle occupants. In the case of flashes on the first curtain blur zastanemu registered by the light in front of the moving object in the scene.
direction and angle of flash - light of different nature
solutions implemented in the lamp reporter Yongnuo III YN565EX allow free formation nature of the emitted light in a split second. Moving burner with automatic (and manual) zoom, diffuser and reflector enable creative selection of the selected scene lighting.
continuous readiness to work
used in flash systems allow to shorten the time between two discharges (at full output power and a base) for only 2 seconds, so that the device provides near-continuous readiness for operation.

Universal supply primary power source for the flash Yongnuo YN565EX III are four cells (batteries) AA. Compatible with universal cell, commonly available in stores around the world that makes the lamp can operate virtually anywhere. Additionally, to optimize the lamp is equipped with the power saving function, which in the case of a long inactivity automatically switches off the lamp.
High-performance
To further improve the performance of the device can be connected to an external water on him or battery power bank for example. YN52000. Additional external power source reduces the time between flashes, and extend the operating time without having to replace batteries.

IA Assistant Front-assist illuminator lamp operation auto-focus system makes it easy to capture perfectly sharp pictures in low light conditions. < br />
Easy to control Easy to read, backlit LCD display and intuitive and feature-rich menus make it easy to navigate the functions of the lamp, and large and comfortable buttons for ease of use even when wearing gloves. You can also enable and disable signal to indicate the charge and ready to re-flash. In cooperation with newer Canon cameras is available control parameters flash from the camera.

Long service components flash YN565EX III made of high quality materials to ensure long life. Advanced system protects the device from overheating. In case of detection of high temperature equipment protection mechanism notifies the user, and then reduce the available functions, thus protecting the lamp against damage.

Full compatibility Mini USB port for updating software ensures compatibility with flash new models of cameras.


СовместимостьCanon
Управление вспышкойTTL

Задать вопрос

Быстрый заказ


В наличии
1 шт.