No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Facebook
Google
- Shoulder-Mounted Aluminum Baseplate
- Composite Shoulder Pad, Cheese Plate
- Back Pad, Paparazzi Top Handle
- 2 x 15mm Rods, 10" in Length
- 1/4"-20 and 3/8"-16 Camera Screws
- 1/4"-20 and 3/8"-16 Accessory Threads
Mount your camcorder or small/midsize ENG-style camera onto your shoulder for handheld shots with this Shoulder Rig Bundle from SHAPE. The rig features an ENG-style baseplate with a 15mm rod clamp, the Paparazzi top handle, a multipurpose cheese plate, a composite mini shoulder pad, a back pad, and two 15mm rods that measure 10" in length.
The aluminum baseplate features 1/4"-20 and 3/8"-16 camera screws to mount your camera, 1/4"-20 and 3/8"-16 accessory mounting threads for a variety of accessories, and 1/4"-20 and 3/8"-16 bottom threads for mounting onto a tripod or rig. The two included 10" 15mm rods mount onto the LWS rod block on the baseplate for additional accessories.
The Paparazzi top handle allows you to carry the rig and perform low-angle shots. It features multiple 1/4"-20 and 3/8"-16 accessory mounting threads and mounts onto the 15mm rods using an integrated rod block. The multipurpose cheese plate also mounts onto the 15mm rods and provides multiple 1/4"-20 and 3/8"-16 accessory mounting threads to mount a battery plate, video transmitter, or other accessories.
The shoulder pad also mounts onto the 15mm rods using its 15mm LWS rod block, and it provides a comfortable fit on your shoulder. The back pad mounts onto the shoulder pad and provides a secure fit on your shoulder, and it can also mount separately available counterweights.
SHAPE Paparazzi with Bloc
The SHAPE Paparazzi with Bloc is an ergonomic-designed Paparazzi Handle screwed tight to a Rod Bloc by two 1/4" screws.
The Handle features a total of 20 screw-holes for attaching accessories, and the Bloc mounts 15mm rods and keeps the Handle parallel with a camera. You can slide the Bloc up and down the rods and tighten it into position by a red lever on the side. Both the Handle and Bloc are totally solid -- not at all hollow -- and are both water cut / laser cut, as opposed to being molded.
The 20 screw-holes are a mix of 1/4", 3/8" and 1/2" sizes and all run completely through from end to end. They are positioned vertically or horizontally along the Handle. The 1/4" and 3/8" holes can take on most any 1/4" and 3/8" accessories like lights, monitors, mics, grips, remote controls, recorders, articulating arms, wireless audio receivers, camera plates, and more. And into the 1/2" holes you can screw in male-threaded SHAPE rods.
The diverse set of screw-holes lets you get very creative in dressing up your rig. And the ability to screw in rods lets you just as creatively extend your rig.
Dress Up Your Rig
- Mounts 15mm rods and keeps an ergonomic Handle parallel with the camera
- Features mix of twenty 1/4", 3/8" and 1/2" screw-holes for attaching accessories
- The 1/2" holes let you screw in male-threaded rods and thus further extend your rig
- Takes on lights, monitors, mics, grips, remotes, recorders, arms, receivers, rods, etc.
- Fully solid and water / laser cut, and the holes run completely through from end to end
SHAPE CP33 Multi-Purpose Mounting Cheese Plate
SHAPE's CP33 Multi-Purpose Mounting Cheese Plate will let you add various accessories and devices to your camera rig. Just attach it to any two 15mm rods on your rig, and you'll have a total of thirty-three 1/4-"20, 3/8"-16, and 10/32" threaded holes to work with.
You can attach accessories to both the front, back and sides, and in some applications at the same time -- for example, you can have a battery plate on the front side and an AJA Ki Pro recorder on the back. The holes on the side are the 10/32" holes. Four are available on each side for audio receiver brackets. Another great accessory you can attach is an articulating arm. You can actually attach a bunch of articulating arms, each pointing in a different direction.
The plate is 1/4"-thick and is precision-machined into one whole, aluminum piece. It comes with sets of screws for attaching the Ki Pro, IDX battery plates and Anton Bauer battery plates.
| Type of Product | Shoulder RIG |
- 1. Evaluate your options.
- 2a. If you want to buy only one product with Aizdevums.lv leasing, then fill out the application here
- 2b. If you want to buy several items or use another leasing company, then put the items in the basket and choose the leasing service when ordering.
We offer leasing from Aizdevums SIA, Incredit SIA, ESTO.
Manager will check the availability of the items in the cart and send the loan application link. - 3. If you receive a positive response, contact us to purchase the product. Consultants will check the availability of the product.
- 4. If the product is available in the store or to be ordered from the warehouse, and you have received an affirmative answer from our consultants, please visit the store to proceed with purchase and leasing documents.
- 4a. You can also ask us to issue an invoice for this product and visit one of the leasing company branches to sign up leasing documents *..
- 5. Once the leasing documents have been signed up, you can receive the product in the store, if it is on site or inform our consultants and they will order it for you from the warehouse.
- *It is possible to arrange delivery for leased goods, so you can also perform the entire purchase process remotely.
**The sequence of leasing steps is the same for leases offered by InCredit Group.
***In case of doubt, contact our consultants!
When using leasing services, carefully evaluate your options to repay the loan!Lease
