SYNCO Mic-D1 MICD1

SYNCO Mic-D1 hyper-cardioid condenser shotgun microphone is designed for video production and broadcast applications. 78dB Signal-to-Noise Ratio (SNR) guarantees better audio signal transmission. The elevated sensitivity of -32dB(±2dB) allows it to produce strong output levels without having to apply extreme gain at your mic preamp, ideal for outdoor recording.

• Made of instrument-grade brass, SYNCO Mic-D1 video shotgun mic has an elegant and solid construction under CNC processing. Brass material would not damps acoustic vibration, and can deliver a bright and clear sound tone; it also endows Mic-D1 with a strong anti-interference capacity. Matte finish rejects unwanted light reflections.
• Designed with a high-pass filter button, SYNCO Shotgun Mic could remove undesired low-frequency noise and rumble at 180Hz, such as footsteps, or motor noises from record players, air conditioners, blowers etc. Using advanced sound wave interference technology, the Mic-D1 tube would filter out some frequency noise too.
• The 11.22 inches length of shotgun condenser mic is well suited for ENG, outdoor recording, and camera mounting. A 3/8” to 5/8” mic holder for easy placement on a boom pole or tripod. Through XLRM-XLRF cable and 3.5mm-XLR cable, the Mic-D1 can connect to cameras, camcorders and mixer board etc.
• Having a gold-plated 3-pin Male XLR connector, SYNCO directional condenser shotgun mic runs on 48V phantom power supplied by most professional video cameras, mixing boards, or recording devices. It can also be powered by one AA battery over 100 hours, which is ideal for DSLR cameras, computers, and other devices that don't offer phantom power.

• Synco Mic-D1 Hypercardioid Shotgun Microphone
• Microphone Holder with 5/8" to 3/8" Adapter
• Foam Windscreen
• XLR Cable
• XLR Female to 3.5mm Male Cable
• Protective Case

• Form Factor Stand/Boom Mount
• Sound Field Mono
• Operating Principle Pressure Gradient
• Capsule 1 x Electret Condenser
• Polar Pattern Hypercardioid
• Orientation End Address
• Circuitry Solid-State
• Pad None
• High-Pass Filter 180 Hz
• Tone Adjustment None
• Gain Adjustment None
• Indicators None
• On-Board Controls High-Pass Filter
• Windscreen Foam (Included)
• Frequency Range 40 Hz to 20 kHz
• Maximum SPL 130 dB SPL
• Impedance 500 Ohms (Phantom Power)
• 600 Ohms (Battery Power)
• Sensitivity -34 dBV/Pa at 1 kHz (Phantom Power)
• -32 dBV/Pa at 1 kHz (Battery Power)
• Dynamic Range 106 dB (Phantom Power, 1 kHz, at Max SPL)
• 91 dB (Battery Power, 1 kHz, at Max SPL)
• Signal-to-Noise Ratio 78 dB (1 kHz)
• Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
• Operating Voltage 48 V (Phantom Power)
• 1.5 V (Battery Power)
• Battery Type 1 x AA (Not Included)
• Approximate Battery Life 100 Hours
• Color Black
• Mounting 3/8"-16 Female, 5/8"-27 Female, Mic Clip/Stand Adapter (with Included Hardware)
• Included Case Hard Case
• Construction Material Brass
• Dimensions ø: 0.83 x L: 11.22" / ø: 2.11 x L: 28.5 cm
• Weight 7.3 oz / 207 g