Pixel Timer Remote Control TC-252/N3 for Canon

The Pixel TC-252/N3 Timer Remote Control is suitable for various Canon cameras and gives you the ability to control your camera from a distance. The TC-252/N3 allows you to take singular photos, multiple photos and photos with a customized shutter speed. If you are able to adjust the exposure time on your camera, the TC-252/N3 allows you to manually set the exposure time up to 99 hours, 59 minutes and 59 seconds. Delay shooting is also possible with the TC-252/N3. In the delay-shooting mode, you are able to select the number of photos you wish to take (1-99) after setting a delay of up to 59 seconds. Once the timer has counted down, the camera will begin taking the selected number of photos with an interval of 1 second. Further, it is possible to set up a timing plan whereby a delay, exposure time and the interval between photos, all of up to 99 hours, 59 minutes and 59 seconds, can be set. Within this time plan, the number of photos you wish to take can be set from either 1-99 photos or an unlimited amount which, triggers the camera to continuously take photos until you press stop.

;

The 2 AAA batteries have a standby time of up to 3 years.

;

The N3 cable is suitable for the following Canon cameras:

;

Canon: EOS 7Dseries, 5Dseries, 1Dseries, 6D, 60D, 40D, 30D, 20D, 10D

;

The TC-252/N3 can be used with various other cameras through the use of a connection cable. Such connection cables can be found in the optional accessories tab below or alternatively, you can find the cable suitable for your camera here: Connection Plugs

The Pixel TC-252/N3 Timer Remote Control is suitable for various Canon cameras and gives you the ability to control your camera from a distance. The TC-252/N3 allows you to take singular photos, multiple photos and photos with a customized shutter speed. If you are able to adjust the exposure time on your camera, the TC-252/N3 allows you to manually set the exposure time up to 99 hours, 59 minutes and 59 seconds. Delay shooting is also possible with the TC-252/N3. In the delay-shooting mode, you are able to select the number of photos you wish to take (1-99) after setting a delay of up to 59 seconds. Once the timer has counted down, the camera will begin taking the selected number of photos with an interval of 1 second. Further, it is possible to set up a timing plan whereby a delay, exposure time and the interval between photos, all of up to 99 hours, 59 minutes and 59 seconds, can be set. Within this time plan, the number of photos you wish to take can be set from either 1-99 photos or an unlimited amount which, triggers the camera to continuously take photos until you press stop.

The 2 AAA batteries have a standby time of up to 3 years.

The N3 cable is suitable for the following Canon cameras:

Canon: EOS 10D ,EOS 1D,EOS 1D C, EOS 1D mk II, EOS 1D mk II N, EOS 1D mk III, EOS 1D mk IV, EOS 1D X, EOS 1D X MK II, EOS 1Ds, EOS 1Ds mk II, EOS 1Ds mk III, EOS 1V, EOS 20D, EOS 20Da, EOS 3, EOS 30D, EOS 40D, EOS 50D, EOS 5D, EOS 5DS, EOS 5DSR, EOS 5DS R, EOS 5D mk II, EOS 5D mk III, EOS 5D MK IV, EOS 6D, EOS 6D MK II, EOS 7D, EOS 7D mk II, EOS D30, EOS D60

The TC-252/N3 can be used with various other cameras through the use of a connection cable. Such connection cables can be found in the optional accessories tab below or alternatively, you can find the cable suitable for your camera here: Connection Plugs