Saramonic Audio Adapter SR-PAX2 for DSLR, CSC and Black Magic Cameras

The SR-PAX2 from Saramonic is a professional 2-channel mixer for the professional user. You can place your camera on top of the SR-PAX2, with the built-in 1/4 screw thread. After that, you need to attach the SR-PAX2 to your camera, with the included 3.5mm cable. You can place the SR-PAX2 and camera on a tripod. The SR-PAX2 features two types of input ports: XLR and 3.5mm. Both possibilites are described below:

;

XLR

;

The SR-PAX2 contains to balanced XLR ports. For both ports you can activate the phantom power. (optional) It's also possible to set the power-level individually for both ports on line, mic and PH.

;

3.5mm

;

The SR-PAX2 does have two 3.5mm mono input ports and one 3.5mm stereo input port. A button lets you switch between mono and stereo. The phantom power can be set on 3V and 5V. (optional) It's also possible to set the power-level individually for both 3.5mm ports on line, mic and PH.

;

You can set adjust the input level for both channels with the turning knobs. It's also possible to connect your headphones to the SR-PAX2, so you can decide what's the best input level. On the screen of the SR-PAX2 you can visually see the levels of both channels. The SR-PAX2 works on a 9V battery. On the side of the SR-PAX2 you can find a hotshoe, to attach for example a microphone holder or receiver.

The SR-PAX2 from Saramonic is a professional 2-channel mixer for the professional user. You can place your camera on top of the SR-PAX2, with the built-in 1/4 screw thread. After that, you need to attach the SR-PAX2 to your camera, with the included 3.5mm cable. You can place the SR-PAX2 and camera on a tripod. The SR-PAX2 features two types of input ports: XLR and 3.5mm. Both possibilites are described below:

;

XLR

;

The SR-PAX2 contains to balanced XLR ports. For both ports you can activate the phantom power. (optional) It's also possible to set the power-level individually for both ports on line, mic and PH.

;

3.5mm

;

The SR-PAX2 does have two 3.5mm mono input ports and one 3.5mm stereo input port. A button lets you switch between mono and stereo. The phantom power can be set on 3V and 5V. (optional) It's also possible to set the power-level individually for both 3.5mm ports on line, mic and PH.

;

You can set adjust the input level for both channels with the turning knobs. It's also possible to connect your headphones to the SR-PAX2, so you can decide what's the best input level. On the screen of the SR-PAX2 you can visually see the levels of both channels. The SR-PAX2 works on a 9V battery. On the side of the SR-PAX2 you can find a hotshoe, to attach for example a microphone holder or receiver.

;

1x SR-PAX2; 1x 3.5mm cable; 1x Warranty card; 1x Manual; 1x Packaging

The SARAMONIC SR-PAX2 is a two-channel active audio mixer with preamplifier and phantom power, specially designed for mirrorless digital camera, Blackmagic Design pocket cinema camera and DSLR camera with a microphone jack.

It is a compact and lightweight mixer ideal for recording professional-quality audio from two sources and mixing them into your camera. It attaches to the base of a camera, and a threaded socket on its base allows for mounting on a tripod or case.

With two sets of inputs, the SR-PAX2 accepts signals from a wide variety of mic or line level sources such as balanced XLR microphones, 3.5mm microphones, wireless microphones and external audio mixers. The 3.5mm inputs are also ideal for connecting audio devices with a 3.5mm output such as a smart phone or an MP3 player.

The input levels of each channel can be easily controlled with the dual gain control knobs. A phone jack allows you to monitor the audio in real time. The SR-PAX2 makes your recording work much easier.

Key Features

• Two 1/8″ (3.5 mm) mono inputs One stereo input
• Two XLR Inputs
• One 1/8 (3.5 mm) stereo output
• Mono/Stereo switch (M/S)
• Left and Right Channel Control Knobs
• Independent phantom power control for inputs. INPUT 1: 5V/OFF/3V; INPUT 2: 48V/OFF
• LINE/MIC/PH switch
• Level Meter Indicates the sound level in dB for each channel
• Headphone jack to monitor the audio from microphones

The Saramonic SR-PAX2 is a multi-channel mixer and microphone preamplifier that was designed to be used with compact mirrorless cameras and the Blackmagic Pocket Cinema Camera, but it works perfectly with DSLR and video cameras as well. The rear panel features two XLR inputs and three 1/8“ (3.5mm) inputs. This makes it possible to connect professional microphones, audio mixers, consumer microphones, the headphone output of a smartphone — any combination of audio sources can be plugged into your camera and recorded with broadcast-quality sound.

The body of the PAX2 has an ergonomic design that doesn’t inhibit how you handle your camera. The XLR inputs can provide condenser microphones with +48 volts of phantom power, or be switched to accept line-level signals from field mixers, DJ mixers, etc. The 1/8“ (3.5mm) inputs can be set to provide two levels of plug-in power for microphones that need it, or none at all to save battery. The backlit meters display lets you easily see your audio levels and other information.

The PAX2 features a dedicated headphone jack so you can always monitor your sound, even when your camera lacks a headphone output. The top panel provides a tripod mount for your camera, and a handy wheel makes attaching and removing it a breeze. The base has another thread to attach the PAX2 to a tripod, and a 3/8“ thread is also provided for additional mounting options. The entire right side is a female camera shoe mount, which is perfect for mounting a wireless microphone receiver or another piece of equipment. The PAX2 offers everything you need to capture pristine sound in any situation with a variety of cameras, and its all-metal construction is ready for the rigors of production.

• Two XLR preamp inputs with +48V phantom power inputs and three 1/8“ (3.5mm) preamp inputs with 5V / 3V plug-in power for mic and line level devices
• Connect, adapt and mix any microphone or audio source to a variety of 1/8“ (3.5mm) mini input cameras
• A dedicated headphone output is provided so you can always hear your sound even when your camera lacks a headphone output
• Can provide +48V phantom power to professional mics, and 5V / 3V plug-in power to consumer mics
• Ergonomic design ideal for Mirrorless cameras and the Pocket Cinema Camera as well as DSLRs and Video Cameras
• Power Requirements: 9V alkaline or lithium battery
• Battery Duration: 5 hours (alkaline battery), 3 hours (lithium battery)
• Dimensions: 136.0 × 80.5 × 62.5 mm
• Weight:13.5 oz / 382.7 g

SARAMONIC PAX2 SR-channel audio adapter is designed mainly for bezlusterkowców, camcorders and cameras VDSLR equipped with a microphone jack, stereo mini-jack 3.5 mm. The device enables two microphones / wireless receivers with the mini-3.5mm or XLR plug (either a single source).

SR-PAX2 is equipped with a preamplifier and phantom power (selectable 3V or 5V sockets for 3.5mm mini-jack and the XLR sockets 48V). It has a clear LCD display allows level control, headphone jack, and a lot of features to facilitate the work.

The housing is a male 1/4 "screw the adapter to the bottom of the camera / camera and female sockets 1/4" and 3/8 "tripod screw. The aluminum case has two feet for mounting microphones, receivers, lighting, etc.. The device is active and is powered by a lithium cell or 9V alkaline.

inputs
- 2x synchronized XLR
- 2x mono mini-3.5mm
- 1x stereo mini-jack 3.5 mm

outputs
- 1x stereo mini-jack 3.5 mm - the output signal
- 1x stereo mini-jack 3.5 mm - headphone

Specification < br /> - frequency: 20Hz - 20kHz
- Dimensions: 136 x 81 x 63 mm
- working time: 3h alkaline battery, lithium battery 8 hours (no phantom power)
- Weight: 385 g
The device is active and is powered by a lithium cell or 9 volt alkaline.

inputs
- 2x synchronized XLR
- 2x mono mini-3.5mm
- 1x stereo mini-jack 3.5 mm

outputs
- 1x stereo mini-jack 3.5 mm - the output signal
- 1x stereo mini-jack 3.5 mm - headphone

Specification < br /> - frequency: 20Hz - 20kHz
- Dimensions: 136 x 81 x 63 mm
- working time: 3h alkaline battery, lithium battery 8 hours (no phantom power)
- Weight: 385 g
The device is active and is powered by a lithium cell or 9 volt alkaline.

inputs
- 2x synchronized XLR
- 2x mono mini-3.5mm
- 1x stereo mini-jack 3.5 mm

outputs
- 1x stereo mini-jack 3.5 mm - the output signal
- 1x stereo mini-jack 3.5 mm - headphone

Specification < br /> - frequency: 20Hz - 20kHz
- Dimensions: 136 x 81 x 63 mm
- working time: 3h alkaline battery, lithium battery 8 hours (no phantom power)
- Weight: 385 g

SARAMONIC PAX2 SR-channel audio adapter is designed mainly for bezlusterkowców, camcorders and cameras VDSLR equipped with a microphone jack, stereo mini-jack 3.5 mm. The device enables two microphones / wireless receivers with the mini-3.5mm or XLR plug (either a single source).

SR-PAX2 is equipped with a preamplifier and phantom power (selectable 3V or 5V sockets for 3.5mm mini-jack and the XLR sockets 48V). It has a clear LCD display allows level control, headphone jack, and a lot of features to facilitate the work.

The housing is a male 1/4 "screw the adapter to the bottom of the camera / camera and female sockets 1/4" and 3/8 "tripod screw. The aluminum case has two feet for mounting microphones, receivers, lighting, etc.. The device is active and is powered by a lithium cell or 9V alkaline.

inputs
- 2x synchronized XLR
- 2x mono mini-3.5mm
- 1x stereo mini-jack 3.5 mm

outputs
- 1x stereo mini-jack 3.5 mm - the output signal
- 1x stereo mini-jack 3.5 mm - headphone

Specification < br /> - frequency: 20Hz - 20kHz
- Dimensions: 136 x 81 x 63 mm
- working time: 3h alkaline battery, lithium battery 8 hours (no phantom power)
- Weight: 385 g
The device is active and is powered by a lithium cell or 9 volt alkaline.

inputs
- 2x synchronized XLR
- 2x mono mini-3.5mm
- 1x stereo mini-jack 3.5 mm

outputs
- 1x stereo mini-jack 3.5 mm - the output signal
- 1x stereo mini-jack 3.5 mm - headphone

Specification < br /> - frequency: 20Hz - 20kHz
- Dimensions: 136 x 81 x 63 mm
- working time: 3h alkaline battery, lithium battery 8 hours (no phantom power)
- Weight: 385 g
The device is active and is powered by a lithium cell or 9 volt alkaline.

inputs
- 2x synchronized XLR
- 2x mono mini-3.5mm
- 1x stereo mini-jack 3.5 mm

outputs
- 1x stereo mini-jack 3.5 mm - the output signal
- 1x stereo mini-jack 3.5 mm - headphone

Specification < br /> - frequency: 20Hz - 20kHz
- Dimensions: 136 x 81 x 63 mm
- working time: 3h alkaline battery, lithium battery 8 hours (no phantom power)
- Weight: 385 g

The SR-PAX2 from Saramonic is a professional 2-channel mixer for the professional user. You can place your camera on top of the SR-PAX2, with the built-in 1/4" screw thread. After that, you need to attach the SR-PAX2 to your camera, with the included 3.5mm cable. You can place the SR-PAX2 and camera on a tripod. The SR-PAX2 features two types of input ports: XLR and 3.5mm. Both possibilites are described below:

XLR

The SR-PAX2 contains to balanced XLR ports. For both ports you can activate the phantom power. (optional) It's also possible to set the power-level individually for both ports on line, mic and PH.

3.5mm

The SR-PAX2 does have two 3.5mm mono input ports and one 3.5mm stereo input port. A button lets you switch between mono and stereo. The phantom power can be set on 3V and 5V. (optional) It's also possible to set the power-level individually for both 3.5mm ports on line, mic and PH.

You can set adjust the input level for both channels with the turning knobs. It's also possible to connect your headphones to the SR-PAX2, so you can decide what's the best input level. On the screen of the SR-PAX2 you can visually see the levels of both channels. The SR-PAX2 works on a 9V battery. On the side of the SR-PAX2 you can find a hotshoe, to attach for example a microphone holder or receiver.