Saramonic Mini Directional Condenser Microphone SR-M3

The SR-M3 features 200Hz low cut filter and +10dB audio level switch to increase intelligibility of dialogue. A headphone jack allows you to monitor the audio when recording. An extra 3.5mm mic input allows you to connect one more microphone to your camera / camcorder.

Key Features

• Directional condenser microphone
• An extra 3.5mm mic input
• Headphone monitor jack
• Integrated shoe-mount
• Low cut filter (200 Hz)
• 3.5mm audio output to camera
• Foam windscreen included
• Lightweight construction
• +10dB audio level switch

The SR-M3 from Saramonic is a compact condenser directional microphone. You place the SR-M3 on the hotshoe of your camera, and you put the 3.5mm plug in your camera. The SR-M3 then ensures that you register the general ambient sound in high quality. The included wind cover ensures that you also take a noise-free shot outside. In addition to a hot shoe connector, there is also a 1/4 female thread at the bottom.

;

Usage SR-M3

;

You can place the SR-M3 on your camera and use it when capturing general sound. This is a directional microphone, which means that the sound is still recorded from a few meters away. In addition, it is possible to connect a second microphone with 3.5 mm male cable to the SR-M3. This ensures that the sound of both the SR-M3 and the second microphone is recorded by the camera. With the 3.5mm headphone jack you can listen to the sound in real time. With the built-in buttons you can switch a low-cut filter on and off and also apply a +10db gain to amplify the sound.

Saramonic SR-M3 is a lightweight and compact condenser microphone for high quality audio designed to work with cameras VDSLR.
The use of an external microphone greatly improves the audio recording in relation to the camera's built-in microphone. Karioidalna directivity SR-M3 allows isolation of ambient noise. Microphone with these characteristics is ideal in situations where you need a precise pick-one sound source in a noisy environment.
Saramonic SR-M3 is equipped with a high-pass filter, which when activated allows to eliminate the interfering low-frequency sounds. The quality of recorded sound is also influenced windshield dome protects the microphone.
The compact size makes the microphone, it is extremely handy and convenient to use. Perfect for both travel and every day.
SR-M3 is equipped with a headphone jack allows listening to recorded material in real time and the mini auxiliary input jack allows you to connect an optional microphone.
Installation of the unit on camera or camera allows the cold shoe compatible with standard sledge flash. Built-in Tripod mount 1/4 "microphone also allows secure on tripods, booms and other photographic mountings. Attaching the microphone is equipped with a vibration damping system caused by camera movements.
The combination of a microphone with a recording device is performed using the built-in mini-jack cable.

Specifications - Model:

Saramonic SR-M3 is a lightweight and compact condenser microphone for high quality audio designed to work with cameras VDSLR.
The use of an external microphone greatly improves the audio recording in relation to the camera's built-in microphone. Karioidalna directivity SR-M3 allows isolation of ambient noise. Microphone with these characteristics is ideal in situations where you need a precise pick-one sound source in a noisy environment.
Saramonic SR-M3 is equipped with a high-pass filter, which when activated allows to eliminate the interfering low-frequency sounds. The quality of recorded sound is also influenced windshield dome protects the microphone.
The compact size makes the microphone, it is extremely handy and convenient to use. Perfect for both travel and every day.
SR-M3 is equipped with a headphone jack allows listening to recorded material in real time and the mini auxiliary input jack allows you to connect an optional microphone.
Installation of the unit on camera or camera allows the cold shoe compatible with standard sledge flash. Built-in Tripod mount 1/4 "microphone also allows secure on tripods, booms and other photographic mountings. Attaching the microphone is equipped with a vibration damping system caused by camera movements.
The combination of a microphone with a recording device is performed using the built-in mini-jack cable.

Specifications - Model:

The SR-M3 from Saramonic is a compact condenser directional microphone. You place the SR-M3 on the hotshoe of your camera, and you put the 3.5mm plug in your camera. The SR-M3 then ensures that you register the general ambient sound in high quality. The included wind cover ensures that you also take a noise-free shot outside. In addition to a hot shoe connector, there is also a 1/4" female thread at the bottom.

Usage SR-M3

You can place the SR-M3 on your camera and use it when capturing general sound. This is a directional microphone, which means that the sound is still recorded from a few meters away. In addition, it is possible to connect a second microphone with 3.5 mm male cable to the SR-M3. This ensures that the sound of both the SR-M3 and the second microphone is recorded by the camera. With the 3.5mm headphone jack you can listen to the sound in real time. With the built-in buttons you can switch a low-cut filter on and off and also apply a +10db gain to amplify the sound.