Saramonic VMIC-WSPRO this type of windshield DeadCat designed for microphones Saramonic Vmic Pro. It reduces unwanted noise caused by the wind during the sound recording in an open space.
New product
Saramonic VMIC-WSPRO this type of windshield DeadCat designed for microphones Saramonic Vmic Pro. It reduces undesirable noise caused by the wind during the sound recording in the open.
Shield VMIC-PRO mounted directly on the microphone Saramonic Vmic Pro or other microphones of similar dimensions: 5.5 cm diameter and 16.5 cm length. Elastic rubber prevents the sliding cover from the device.
Specification
- Weight: 15 g
- color: gray
compatibility
- microphone Saramonic Vmic Pro
- other microphones of similar dimensions: - diameter 5.5 cm
- length: 16.5 cm
The VMIC Pro Super Directional Video Condenser Microphone from Saramonic is a broadcast-quality condenser microphone that allows you to adjust the level control (-10 dB, 0 dB, and +20 dB), high-pass filter (150 Hz), and high-frequency boost (+6 dB), which allows you to capture audio in a wide range of environments for DSLR camera and camcorder applications.
The detachable 3.5mm cable connects the VMIC Pro to the audio input of the camera, while the stereo headphone output allows you to monitor the incoming audio. A rubberized shockmount system provides isolation from vibration and results in a substantial reduction of handling noise. In addition, a foam windscreen is also included.
Analog Performancebfytvfrezw | |
---|---|
Sound Field | Mono |
Transducer | Condenser |
Polar Pattern | Supercardioid |
Frequency Range | 20 Hz to 20 kHz |
Signal to Noise Ratio | 75 dB |
Pad | -10 dB |
Impedance | 200 Ohms |
Sensitivity | 30 dB at 1 kHz |
Accessories for microphones | Vējsargi |