0 Товар Товары 0 Товар - € 0.00
Предпросмотр корзины
Нет товаров
Бесплатно получить в магазине! Доставка
€ 0.00 НДС:
€ 0.00 Итого
Продукт был добавлен в вашу корзину
Количество :
Итого
Товаров в корзине: 0 [/ 1] Ваша корзина пуста. В вашей корзине 1 товар.
Сумма корзины с НДС:
Стоимость доставки с НДС: Бесплатно получить в магазине!
НДС: € 0.00
Итого с НДС:
Facebook
Google
Твой фото магазин
With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.
Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.
Additional lens is suitable for:
Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.
Additional lens is suitable for:
- Bresser Stereo Microscopes Advance ICD (5804000)
- Bresser Science ETD-101 (5806100)
- 1x Additional Objective 2.0x
