SmallRig 3928 L Bracket for FUJIFILM X H2S

SmallRig 3928 L-Bracket for Fujifilm X-H2S

Securing the camera via a 1/4"-20 screw and an anti-twist locating pin at the bottom.

The L bracket comes with protective cushions that prevent scratches and a hinge arm at the battery door that fits the camera well and improves the grip experience of the little finger.

Its Arca-Swiss baseplate and side plate each have a center mark.

In the baseplate, there are 1/4"-20 threaded holes for SmallRig Manfrotto Quick Release Plate 1280, Side Handle 2093, etc.

An Arca-Swiss mounting point on the bottom for Arca-Swiss tripod/heads and DJI RS 2 / RSC 2, and a built-in strap hole for SmallRig Hand Strap 3848 and 2456.

On the top of the side plate, there are two 1/4"-20 threaded holes which are available to use with SmallRig Cold Shoe 2736 for attaching microphones, light, and more devices.

The stretchable side plate gives access to the HDMI cable and can be adjusted back and forth for a 180° opening of the LCD screen.

Its gap design means you can rotate the screen about 60°.

In addition, an accessible flat-head screwdriver and a hex spanner are included for quick assembly and disassembly.

Compatible:
FUJIFILM X-H2S

In the box:
1x L Bracket

SmallRig L Bracket for FUJIFILM X-H2S 3928 is designed for quick switch between horizontal and vertical shooting while improving grip experience. Securing camera via a 1/4＂-20 screw and an anti-twist locating pin at the bottom, the L bracket comes with protective cushions that prevent scratches and a hinge arm at the battery door that fits the camera well and improves grip experience of the little finger. Its Arca-Swiss baseplate and side plate each has a center mark. In the baseplate, there are 1/4 "-20 threaded holes for Manfrotto Quick Release Plate 1280, Side Handle 2093, etc., Arca-Swiss mounting point on the bottom for Arca-Swiss tripod and DJI RS 2 / RSC 2; and a built-in strap hole for Hand Strap 3848 and 2456. On the top of side plate, there are two 1/4 "-20 threaded holes which are available to use with Cold Shoe BUC2736 for attaching microphone, light, and more devices. The stretchable side plate gives access to HDMI cable and can be adjusted back and forth for 180° opening of the LCD screen. Its gap design means you can rotate the screen about 60°. In addition, an accessible flat-head screwdriver and a hex spanner are included for quick assembly and disassembly.

• 1x L Bracket

• Product Dimensions: 145 × 68 × 90 mm
• Package Dimensions: 160 × 150 × 68 mm
• Net Weight: 135g±5g
• Package Weight: 225g±5g
• Material: Aluminum Alloy