0 Товар Товары 0 Товар - € 0.00
Предпросмотр корзины
Нет товаров
Бесплатно получить в магазине! Доставка
€ 0.00 НДС:
€ 0.00 Итого
Продукт был добавлен в вашу корзину
Количество :
Итого
Товаров в корзине: 0 [/ 1] Ваша корзина пуста. В вашей корзине 1 товар.
Сумма корзины с НДС:
Стоимость доставки с НДС: Бесплатно получить в магазине!
НДС: € 0.00
Итого с НДС:
Facebook 
Google 
Your photo & video sotre
- Напишите свой отзыв
Yongnuo YN560-TX II is a radio controller for remote triggering of the flash and controlling the operation parameters flash-compatible Yongnuo RF602 and RF603 (YN560 III, IV YN560, YN660, YN860Li).
Radio controller Yongnuo YN560-TX II for Nikon
Код продукта: 28529
SKU: 28529
Модель: YN-560TX-N
Ean: 6947110919362
Производитель: YongNuo
Состояние Новый продукт
Найдите похожие товары
Найдите похожие товары
Помощник на основе искусственного интеллекта
Это бета-версия нашего нового чата с ИИ помощником, способного отвечать как на стандартные, так и на сложные вопросы о товарах и работе магазина.
или спросите
Какие функции? Есть в наличии? Акции и скидки?
| Совместимость | Nikon |
| Предназначение | Для накамерных вспышек |
| Вид триггера | raidītājs |
Описание продукта
unless the camera offers such a possibility.
Yongnuo YN560-TX II is powered by two AA batteries. The controller housing is made of high quality plastic. Hot shoe protects the rubber seal.
Working comfort with the device provide: a clear backlit display, intuitive interface and large buttons.
Specifications - Model: YN560-TX II Nikon cameras
- signal frequency 2.4 GHz
- signal range: 100 m
- available channels work 16
- the available groups of lamps 6
- modes : manual, strobe
- available zoom range settings burner: 24-105 mm
- cable outlet drain: micro jack 2.5 mm (no cable included)
- power supply:
unless the camera offers such a possibility.
Yongnuo YN560-TX II is powered by two AA batteries. The controller housing is made of high quality plastic. Hot shoe protects the rubber seal.
Working comfort with the device provide: a clear backlit display, intuitive interface and large buttons.
Specifications - Model: YN560-TX II Nikon cameras
- signal frequency 2.4 GHz
- signal range: 100 m
- available channels work 16
- the available groups of lamps 6
- modes : manual, strobe
- available zoom range settings burner: 24-105 mm
- cable outlet drain: micro jack 2.5 mm (no cable included)
- power supply:
The Yongnuo YN560-TX II is a radio controller for remote flash triggering and parameter control of Yongnuo RF602 and RF603 compatible flashes (YN560 III, YN560 IV, YN660, YN860Li). In cooperation with flashes equipped with a built-in compatible receiver, the controller enables wireless: flash triggering control of flash power control of flash unit zoom lamp operation mode setting (manual/strobe) lamp group management (up to 6 groups) operation channel selection (16 channels available) Using the controller YN560-TX II in combination with Yongnuo RF602 or RF603 triggers also allows you to trigger other flashes and remotely trigger your camera's shutter, as long as your camera offers this capability. The Yongnuo YN560-TX II is powered by two AA batteries. The controller housing is made of high quality plastic. The hot shoe is protected by a rubber gasket. Comfort of working with the device is ensured by: easy-to-read backlit display, intuitive interface and large buttons. Specification model: Yongnuo YN560-TX II for Nikon cameras signal frequency: 2.4 GHz signal range: up to 100 m available operating channels: 16 available lamp groups: 6 Trigger mode: manual M stroboscopic multi available range of torch zoom settings: 24 - 105 mm trigger cable socket: 2.5 mm micro jack (cable not included) power supply: 2x alkaline battery / AA type rechargeable battery (not supplied) dimensions: 6.6 x 8.9 x 4.2 cm weight: 76 g Compatibility Apparatus: Nikon brand cameras equipped with flash sockets Yongnuo flashes: YN560 III YN560 IV YN660 YN968N YN860Li Yongnuo radio triggers: YN602 YN603 YN603 II YN605 Content of kit Yongnuo YN560-TX II radio controller for Nikon
