Yongnuo YN968N II TTL Speedlite for Nikon Cameras

Yongnuo YN968N is an innovative lamp reporter, combining the advantages of flash light and continuous. The lamp has a built-in radio receiver that allows communication with the camera system Yongnuo YN622 and YN560.
characteristic YN986N head is equipped with two light sources: flash burner and a panel with LEDs. The flash generates a flash with GN 60 (ISO 100, 105mm). High power combined with short charging times guarantees immediate readiness to act at any time. In adverse lighting conditions with the help comes LED panel for easy focusing and framing the correct scene.
The head lamp offers a wide range of motion, making it easy to quickly set the torch in the desired direction. Automatic (and manual) zoom lamps, diffusers (for both light source) and the reflector enable creative selection of the selected scene lighting.
Yongnuo lamp is equipped with a mode sync shutter speed (HSS to 1/8000 s) and the selection of the automation system under TTL functions extremely useful in variable lighting conditions.
Easy to read LCD display with backlight and intuitive and feature-rich menu provide comfort. Large, comfortable buttons allow you to operate the lamp even when wearing gloves. You can enable and disable the signal to indicate the charge and ready to re-flash.
The built-in radio receiver enables wireless communication system Yongnuo YN622 and YN560.
YN968N can be used as a unit of "master" to control other lamps YN968N, YN685 and triggers YN622N, YN622N II.
In the "slave" YN968N can receive radio signals from the other lamp YN968N and triggers YN622N, YN622N II YN622N- TX, YN560-TX RF605 RF-603.
YN986N can also be used in the system of the optical flash control. In the "slave" lamp can receive the optical signal from the lamp Yongnuo YN568EX II Canon 580EX II, Nikon SB-700, SB-800, SB-900, SB-910 and the built-in lamp Canon (600D, 60D, 7D) and Nikon .
the lamp can also be triggered flash in manual mode S1 and S2. This allows the primary wireless communication with almost all flash units on the market.
Built-in PC allows you to trigger the flash through the cable.
Yongnuo YN968N is powered by four AA batteries. The lamp has a jack for connecting an additional power supply and mini USB port for software updates. Foot lamp has been protected from inclement weather rubber seal.
Complete with lamp cover are practical, CTO filter to the LED panel and the stand with a stand mount female 1/4 ".

Specifications < br /> - model: YN968N
- guide number GN 60 (ISO 100, 105 mm)
- control FV: 1/128 - 1/1 1/3 EV
- operating modes: TTL / manual / stroboscopic
- the possibility of triggering the camera via radio system YN622 and YN560, advanced optical system, triggering flash standard S1 and S2, the PC port <

Yongnuo YN968N is an innovative lamp reporter, combining the advantages of flash light and continuous. The lamp has a built-in radio receiver that allows communication with the camera system Yongnuo YN622 and YN560.
characteristic YN986N head is equipped with two light sources: flash burner and a panel with LEDs. The flash generates a flash with GN 60 (ISO 100, 105mm). High power combined with short charging times guarantees immediate readiness to act at any time. In adverse lighting conditions with the help comes LED panel for easy focusing and framing the correct scene.
The head lamp offers a wide range of motion, making it easy to quickly set the torch in the desired direction. Automatic (and manual) zoom lamps, diffusers (for both light source) and the reflector enable creative selection of the selected scene lighting.
Yongnuo lamp is equipped with a mode sync shutter speed (HSS to 1/8000 s) and the selection of the automation system under TTL functions extremely useful in variable lighting conditions.
Easy to read LCD display with backlight and intuitive and feature-rich menu provide comfort. Large, comfortable buttons allow you to operate the lamp even when wearing gloves. You can enable and disable the signal to indicate the charge and ready to re-flash.
The built-in radio receiver enables wireless communication system Yongnuo YN622 and YN560.
YN968N can be used as a unit of "master" to control other lamps YN968N, YN685 and triggers YN622N, YN622N II.
In the "slave" YN968N can receive radio signals from the other lamp YN968N and triggers YN622N, YN622N II YN622N- TX, YN560-TX RF605 RF-603.
YN986N can also be used in the system of the optical flash control. In the "slave" lamp can receive the optical signal from the lamp Yongnuo YN568EX II Canon 580EX II, Nikon SB-700, SB-800, SB-900, SB-910 and the built-in lamp Canon (600D, 60D, 7D) and Nikon .
the lamp can also be triggered flash in manual mode S1 and S2. This allows the primary wireless communication with almost all flash units on the market.
Built-in PC allows you to trigger the flash through the cable.
Yongnuo YN968N is powered by four AA batteries. The lamp has a jack for connecting an additional power supply and mini USB port for software updates. Foot lamp has been protected from inclement weather rubber seal.
Complete with lamp cover are practical, CTO filter to the LED panel and the stand with a stand mount female 1/4 ".

Specifications < br /> - model: YN968N
- guide number GN 60 (ISO 100, 105 mm)
- control FV: 1/128 - 1/1 1/3 EV
- operating modes: TTL / manual / stroboscopic
- the possibility of triggering the camera via radio system YN622 and YN560, advanced optical system, triggering flash standard S1 and S2, the PC port <

For advanced functionality, Yongnuo employs both a 2.4 GHz radio system for master and slave operation as well as optical TTL slave support for both Nikon and Canon systems. The radio function supports Yongnuo's YN622N (master/slave) and YN560 (slave) systems, which ensures maximum compatibility with existing units and equipment. The flash offers users a zoom range of 20-200mm and has a pull-out diffusion panel for ultra-wide 14mm optics. Users can also tilt the flash from -7 to 150° and rotate it 360° for easy positioning and bounce operation. For video, an LED light with power control options and its own diffusion panel is built into the YN968N II and comes with a color conversion filter blend into warm, tungsten-balanced scenes. The flash runs on four AA batteries and will recycle in three seconds at full power. Additionally, it has 1st and 2nd curtain sync as well as high-speed sync and has PC sync, external power, and USB ports for triggering, battery packs, and firmware updates. In the Box Yongnuo YN968N II TTL Speedlite for Nikon Cameras Color Conversion Filter for LED Light Mini Stand Protecting Bag