FNIRSI WMT-10 hygrometer - non-invasive moisture meter with 4 modes

FNIRSI WMT-10 indicative moisture meter hygrometer

The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it works well with wood, as well as for testing walls, floors, or building materials. High resolution (0.1) and a wide measurement range of up to 75 allow precise results in just seconds. The large 2.4-inch TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions.

Measurement on any surface - 4 modes of operation

The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75 moisture at a measurement depth of 17 mm.

Advanced measurement functions

The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 x 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time.

Durable design and convenient operation

The FNIRSI WMT-10 is not only about functionality but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10, or 15 minutes. The compact size makes the meter easy to fit in a tool bag.

Versatile applications

The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete, or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry, and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial.

The set includes

• moisture meter
• Type-C cable
• user manual

FNIRSI WMT-10 indicative moisture meter hygrometer

The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it works well with wood, as well as for testing walls, floors, or building materials. High resolution (0.1) and a wide measurement range of up to 75 allow precise results in just seconds. The large 2.4-inch TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions.

Measurement on any surface - 4 modes of operation

The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75 moisture at a measurement depth of 17 mm.

Advanced measurement functions

The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 x 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time.

Durable design and convenient operation

The FNIRSI WMT-10 is not only about functionality but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10, or 15 minutes. The compact size makes the meter easy to fit in a tool bag.

Versatile applications

The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete, or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry, and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial.

The set includes

• moisture meter
• Type-C cable
• user manual

Specifications

• Manufacturer: FNIRSI
• Model: WMT-10
• Display: 2.4-inch color TFT screen
• Screen resolution: 0.1
• Maximum detection depth: 17 mm
• Sensor dimensions: 40.5 x 40.5 mm
• Working temperature: 0-40°C
• Measurement range: Gypsum wall 0-25, brick wall 0-43, soft wood 0-75, hard wood 0-75
• Maximum measurement range: 0-75
• Error range: 1.5
• Power source: Lithium rechargeable battery with 1000 mAh capacity