PremiumCord HDMI 2.0b Active Optical Fiber Cable 25m 4K@60Hz M/M Gold

High-Speed HDMI 2.0b Active Optical Fiber Cable

This PremiumCord optical HDMI cable is designed for ultra high-speed digital audio and video transmission between modern HDMI devices such as HD-DVD/BluRay players and LCD/Plasma TVs. It supports Ultra High Definition 4K resolution at 60Hz with full 4:4:4 color subsampling and is backward compatible with earlier HDMI standards.

Key Features

• Supports 4K@60Hz (2160p@60Hz) resolution with YUV 4:4:4 color format
• Maximum data transfer rate of 18 Gbps (600 MHz) for HDMI 2.0 or 10.2 Gbps for HDMI 1.4
• Hybrid 4.5 mm diameter optical cable combining 4x OM3 multimode optical fibers and 7x conductors
• Gold-plated HDMI Type A (19-pin) male connectors on both ends
• Supports resolutions down to 1080p Full HD, 1080i, 720p, and 720i
• Backward compatible with HDMI 2.0a, 2.0, 1.4 and earlier versions
• Supports advanced HDMI features including ARC (Audio Return Channel), HEC (HDMI Ethernet Channel), EDID, DDC, and CEC (Consumer Electronics Control)
• Supports HDR (High Dynamic Range) and 3D video over HDMI
• Supports HDCP 1.4 and HDCP 2.2 digital content protection
• Compatible with multi-dimensional audio formats such as Dolby Atmos and DTS:X, as well as Dolby TrueHD and DTS-HD Master Audio bitstream
• Complete power supply via HDMI bus with consumption less than 250 mW; no external power supply required
• Flexible fiber optic cable with small bending radius of 20 mm and cross section of 4.6 mm
• Durable black cable with gold-plated connectors housed in metal caps
• Cable length: 25 meters

Usage Notes

The cable contains active electronics that operate in only one signal direction. It must be connected with the devices powered off and always plugged in the direction indicated on the cable. The connector marked "Source" should be connected to the transmitting device (e.g., DVD or BluRay player), and the connector marked "Display" should be connected to the receiving device (e.g., LCD TV or projector).