Yongnuo YN200 Speedlite

- Supports YONGNUO new upgraded RF radio flash system - It can receive the controlling and triggering signal from the TTL master unit such as YN862 series, YN560-TX PRO series , realizing TTL and M/Multi mode off-camera flash; It could receive the controlling and triggering signal from the wireless flash trigger such as YN560-TX (II)/RF603/RF605 wireless flash trigger, realizing M/Multi mode flash. - Using removable bare tube lamp tube, GN60 high index - GN60@ ISO100 (using reflector cover). Supports TTL flash, manual flash, multi flash, high speed synchronization, up to 1/8000 seconds. - 16 channels, up to 10,000 configurable photographer ID, six flash groups A/B/C/D/E/F. - Equipped with attachment bayonet, accessories such as reflective cover can be installed. - It is equipped with large capacity battery with imported cell, using Type-C interface charger, which supports quick charging with PD protocol power adapter (excluded). - Supports USB firmware upgrade - Equipped with Micro USB interface, supports firmware upgrade, users can log in the Yongnuo official website to download the firmware upgrade package to upgrade the flash. - Supports wireless optical slave function. - It can receive the master optical control signals of Yongnuo,C/N, and supports S1 and S2 pre-flash cancel trigger mode. - Equipped with 3.5mm synchronization jack, supports synchronization interface flash. Specifications Model: YN200 Flash output:200W Guide No:60@ISO100 (using the reflector) Color temperature:5600k Power supply: 14.4V 2900mAh lithium battery Recycle time: About 0.01-2S Power Adjustment: 1/1~1/64 Full power flashes: About 500 Trigger mode: Radio slave mode(YN560), optical transmission mode(SC/SN), S1, S2, synchronous interface trigger Flash mode: TTL、M、Multi Synchronous interfaces:3.5MM Upgrade interface: Micro -USB Dimensions：About 205*78*53mm(without flash tube) Weight: About 540g(without battery and flash tube) Contains items: YN200 speedlite (1), 200W Flash tube (1),YN-B2900 Li-ion battery (1),YN-C2900 charger (1),charging cable (1) The Yongnuo YN200 is a small flash with great capabilities. Its compact body combines the advantages of versatile reporter flashes with the high power of studio flashes. It is powered by a powerful 2900 mAh replaceable battery that will trigger up to 500 flashes at full 200 Ws. Working with TTL automatic light metering, HSS mode and built-in radio control are just a few of its many advantages. Power and capability . The flash is equipped with a 200 Ws burner (guide number 60 GN / ISO 100 with canopy mounted). The Yongnuo YN200 is almost four times more powerful than standard reporter lights, yet it is no different in size and weight. The flash can be used in automatic (TTL), manual (M) and strobe (Multi) modes, and a built-in receiver for the YN560-TX PRO radio system means it can be controlled remotely. In addition, the Yongnuo YN200 is equipped with the HSS function, which allows the use of flash lighting also at very short exposure times (up to 1/8000 s). The flash is powered by a very powerful 2900 mAh battery, which allows up to 500 flashes to be triggered at full power. The reloading time is between 0.01 and 2 seconds, depending on the flash power. The flash power can be precisely adjusted between 1/1 - 1/64 in 1/3 EV increments. Control of the flash is facilitated by an easy-to-read LCD display and an ergonomic control panel located on the rear of the device. Radio, optical and cable connectivity . Wireless communication with the YN200 flash is possible in two ways. The first is based on radio communication, supported by the new 560 PRO system, which integrates the two older YN560 and YN622 systems into one compatible unit. The other works via an optical signal in the Nikon / Canon trigger system and in photocell mode. The flash also has a 3.5mm mini jack sync socket, which allows you to plug in external triggers or connect directly to your camera with a suitable cable. Additional accessories . In addition to the Yongnuo YN200 lamp, the kit includes a rechargeable battery, charger with USB - USB-C cable, a replaceable torch and a canopy with a milky diffuser. The lamp has two 1/4" threads, allowing it to be mounted on a lighting tripod. When the lamp is installed in a special bracket (not included), a full range of Bowens-mounted modifiers can be used. Yongnuo YN-200 is a versatile flash that will find use on all kinds of shoots and photo sets. It has all the features necessary for professional work, such as TTL and HSS. Despite its ultra-compact size, it is approximately 4 times more powerful than typical speedlites and will light any frame with ease. It's a practical solution for photographers looking for a flash that offers plenty of flexibility and solid power. Specification . - Model: Yongnuo YN200 - flash power: 200 Ws - guide number: GN 60 (at ISO100 with reflector mounted) - operation modes: TTL, M, Multi - colour temperature: 5600 K - power supply: YN-B2900 Li-Ion rechargeable battery - 14.4 V 2900 mAh - charging time: 0.01 - 2 s - flash duration: 1/200 s - 1/9700 s - HSS mode operation: up to 1/8000 s - flash power adjustment: 1/1 - 1/64 - number of flashes at full power: up to 500 - number of groups: 6 - radio communication: built-in receiver compatible with YN560-TX PRO - number of radio communication channels: 16 - optical communication (photocell): SC/SN, S1, S2 - sync socket: 3.5 mm - software update: via micro USB port - mounts: 2 x 1/4" female tripod threads - dimensions: 20.5 x 7.8 x 5.3 cm (without torch) - weight: 540 g (without batteries and torch) Kit contents . - Yongnuo YN200 outdoor flash unit - 200W burner - battery pack YN-B2900 - charger YN-C2900 - canopy with diffuser - USB-A - USB-C cable