Sunlu PLA Glow-in-the-Dark Filament White-Green

Sunlu PLA Glow-in-the-Dark Filament (White-Green)

The Sunlu PLA Glow-in-the-Dark filament in white and green is designed to give 3D prints a unique and eye-catching appearance. It contains phosphorescent components that absorb light energy and emit a striking glow in the dark. The glow effect intensifies after exposure to UV light, making it ideal for creating decorative models, gadgets, and elements that stand out in low light conditions. Note that prolonged exposure to direct sunlight may accelerate color fading.

Precision You Can Rely On

Manufactured with high precision, this filament has a diameter of 1.75 mm with a dimensional tolerance of ±0.03 mm, ensuring consistent filament feed and print quality. The 1 kg spool supports printing of both small and complex models without frequent material changes, providing stable and predictable performance for projects requiring aesthetic finishes and repeatability.

Ready to Use

The filament is pre-dried for 24 hours and vacuum-sealed with a desiccant inside a resealable nylon bag to maintain optimal condition and reduce printing issues. This preparation supports clog-free and bubble-free printing, allowing smooth operation and focus on creation rather than troubleshooting.

Wide Compatibility

Compatible with all popular FDM 3D printers supporting 1.75 mm filament, Sunlu PLA Glow-in-the-Dark offers seamless integration with various devices. Its tight diameter tolerance and high manufacturing standards ensure stable and satisfying printing results, making it a reliable choice for users seeking glow-in-the-dark effects combined with quality and ease of use.

Specifications

• Manufacturer: Sunlu
• Model: PLA Glow W-G
• Color: White-green
• Filament diameter: 1.75 mm
• Tolerance: ±0.02 mm
• Printing temperature: 200–210°C
• Bed temperature: 50–65°C (heating recommended); no adhesive needed when heated; adhesive required if unheated
• Tensile strength: 11–16 kgf (at 23°C, 1.75 mm diameter)
• Melting rate: 7–9 g/10 min (190°C, 2.16 kg load)
• Elongation at break: 4%
• Melting temperature: 165–180°C
• Heat deflection temperature: 55°C
• Density: 1.24 g/cm³
• Water absorption: 0.5%
• Recommended printing speed: 50–100 mm/s
• Weight: 1 kg per spool
• Length: 330 m (1.75 mm diameter)