Filament PLA Anycubic 1 KG (Interstellar Violet) IPHPL16-106

PLA Anycubic Filament 1 KG (Interstellar Violet)

Anycubic PLA Filament combines precision and environmental protection. With perfect, clean winding, each spool guarantees a smooth, uninterrupted printing process, and a uniform diameter with a tolerance of 0.02 mm eliminates air bubbles and the risk of nozzle clogging. Color remains intense from the first layer to the last, and biodegradable PLA from naturally grown corn is a conscious planet-friendly choice. In addition, the built-in RFiD chip automatically optimizes the printer's parameters, ensuring perfect results without the need for manual calibration. With Anycubic, every project will gain brilliance and top quality.

Perfect winding without tangles

Anycubic's filament spool is designed to ensure perfect material winding. Thanks to the precise control of the filament tension, you don't have to worry about jams or unexpected interruptions. Every meter of Anycubic filament extends smoothly and without interference, resulting in a stable and uninterrupted printing process.

Perfect precision and color uniformity

The filament maintains a uniform diameter with a tolerance of +0.02 mm, which guarantees no air bubbles and completely eliminates the risk of nozzle clogging. Each layer of the print looks even and smooth, and the color remains intense and consistent from the beginning to the end of the project.

Environmentally friendly material

The PLA used in Anycubic's filament is made from lactic acid created by fermenting corn starch or other plants. Thanks to its biodegradable nature, it is friendly to the planet and completely safe to use. By choosing Anycubic, you not only care about the quality of your prints but also the environment.

Smart settings with RFiD technology

The spool's built-in RFiD chip works with the separately available Anycubic Color Engine Pro module to automatically recognize the type of filament and adjust printer parameters. Print settings are optimized non-intrusively, allowing you to achieve the best results without having to manually calibrate the device.

Manufacturer: Anycubic
Model: IPHPL16-106
Material: PLA
Dimensions: 1.75 ± 0.02 mm
Total length: 330 m
Weight: 1 kg
Hardness: 81D
Nozzle temperature: 200-210°C
Heating table temperature: 50-60°C
Tensile strength: 61 MPa
Volume: 1.23 g/cm³
Color: Purple (Interstellar Violet)