No products
Facebook 
Google 
- Write a review
Sunlu E2 Filament Dryer
AI ASSISTANT CHAT
Or ask about:
| Type of Product | 3D Printer accessory |
| Color | White |
- 1. Evaluate your options.
- 2a. If you want to buy only one product with Aizdevums.lv leasing, then fill out the application here
- 2b. If you want to buy several items or use another leasing company, then put the items in the basket and choose the leasing service when ordering.
We offer leasing from Aizdevums SIA, Incredit SIA, ESTO.
Manager will check the availability of the items in the cart and send the loan application link. - 3. If you receive a positive response, contact us to purchase the product. Consultants will check the availability of the product.
- 4. If the product is available in the store or to be ordered from the warehouse, and you have received an affirmative answer from our consultants, please visit the store to proceed with purchase and leasing documents.
- 4a. You can also ask us to issue an invoice for this product and visit one of the leasing company branches to sign up leasing documents *..
- 5. Once the leasing documents have been signed up, you can receive the product in the store, if it is on site or inform our consultants and they will order it for you from the warehouse.
- *It is possible to arrange delivery for leased goods, so you can also perform the entire purchase process remotely.
**The sequence of leasing steps is the same for leases offered by InCredit Group.
***In case of doubt, contact our consultants!
When using leasing services, carefully evaluate your options to repay the loan!Lease
Sunlu E2 Filament Dryer
The SUNLU FilaDryer E2 is a groundbreaking 2-in-1 device designed for the most demanding 3D printing users. It combines drying and annealing functions, offering full control over material properties. With a power output of 500W, rapid heating (50°C in 20 minutes, 70°C in 30 minutes), and a maximum temperature of 110°C, the E2 not only dries the filament but also significantly improves its mechanical properties. Its sealed design, large chamber accommodating spools up to 3 kg, and intelligent safety features make it a professional tool for working with both engineering and standard materials.
Drying and annealing in one maximum quality for your prints
The SUNLU E2 not only removes moisture from filaments but also allows for their annealing, a process that significantly increases the impact resistance, strength, and stability of your models. This solution will be particularly appreciated by those working with engineering materials; your prints become stronger, more durable, and ready for the most demanding applications.
Up to 110°C full power for engineering materials
Thanks to its high operating temperature, the device supports as much as 99.99% of filaments available on the market, including advanced materials such as PA, PC, ASA, and composites with carbon and glass fibers. This means you can work without limitations—whether you're creating mechanical parts, drone components, or parts requiring high durability.
Instant heating time savings and greater efficiency
A powerful 500W PTC heater ensures the device heats up extremely quickly. You don't waste time waiting; the filament is ready to use almost immediately. This is particularly important for intensive projects and production work, where every minute counts.
Fully sealed and insulated filament always dry and ready
An advanced sealing system with silicone components effectively blocks moisture from entering from the outside. Additionally, the dual-chamber design provides excellent thermal insulation, allowing for a stable temperature to be maintained even above 100°C. The result? Ideal conditions for both drying and annealing—without the risk of re-moisturization.
Large workspace more possibilities in a single device
The chamber, sized to accommodate large spools (up to Ø250 mm), allows for various configurations—from two 1 kg spools, through 2 kg, up to a single 3 kg spool. This is a huge convenience for those working on larger projects or using industrial filaments.
Smart safety features safety without compromise
The SUNLU E2 is equipped with a multi-level protection system: temperature control, automatic shutdown in case of overheating, and warning alarms. Additionally, double insulation ensures that even at internal temperatures above 100°C, the housing remains safe to touch. This is equipment you can rely on.
Unlimited compatibility one device for everything
Support for 1.75 mm and 2.85 mm filament diameters and compatibility with a wide range of materials—from PLA to advanced composites—mean the E2 fits into any workspace. Built-in material profiles and simple operation let you quickly select optimal settings and focus on what matters most: creating.
Annealing that makes a difference unlock the potential of your materials
The annealing process reduces internal stresses created during printing and significantly improves the mechanical properties of your models. With the SUNLU E2, your prints gain a new level of quality—greater strength, stability, and durability—opening the door to professional and industrial applications.
Included
- SUNLU E2 Filament Dryer
- PTFE tubes
- Annealing tray
- Power cord
- High-temperature resistant gloves
- User manual
Specifications
- Maximum operating temperature: 110°C
- Power: 500 W
- Power supply: AC 100-240 V / 50-60 Hz
- Heating time to 50°C: approx. 20 minutes
- Heating time to 70°C: approx. 30 minutes
- Supported filament diameters: 1.75 mm / 2.85 mm
- Maximum spool size: Ø250 mm
- Capacity: 2 x 1 kg / 2 x 2 kg / 1 x 3 kg
- Material compatibility: PLA, PLA+, PETG, TPU, ABS, ASA, PC, PVB, PVA, PA, PA6, PA12, PA-CF, PA-GF, and others
- Functions: Drying and annealing
- Heating system: High-power PTC
- Insulation: Double thermal insulation
- Sealing system: Silicone gaskets and magnetic closure
