ELEGOO PLA Marble Filament 1kg

PLA Marble Filament by ELEGOO

Marble-colored filament from ELEGOO enables the creation of unique 3D printed models with a realistic stone finish. Additives incorporated into the filament produce the characteristic marble effect on the surface, making it ideal for decorative items, figurines, and architectural mock-ups. The filament is based on PLA (polylactide), a plant-based biodegradable plastic, ensuring environmental friendliness. Each spool contains 1 kg of filament, sufficient for many medium to large prints.

Stable and Clean Printing

The filament has a diameter of 1.75 mm with a precise dimensional tolerance of ±0.02 mm, ensuring smooth and consistent feeding into the 3D printer without jams. It adheres well to the print bed and minimizes defects such as bubbles or excessive stringing, reducing material waste and saving printing time. The result is smooth, durable models with a uniform appearance.

Practical and Eco-Friendly Spools

The filament is wound on cardboard spools, which are recyclable and reduce environmental impact. Each spool is machine-wound and hand-checked to prevent tangling. Three holes in the spool allow easy monitoring of remaining filament.

General Specifications

• Manufacturer: ELEGOO
• Model: 50.203.0113
• Color: Marble
• Weight: 1 kg

Recommended Print Settings

• Drying before printing: 55 ± 5°C
• Storage conditions: 50°C, 20% relative humidity (store with moisture absorber)
• Nozzle temperature: 190 - 230°C
• Print bed temperature: 35 - 65°C (depending on printer and surface)
• Print surface: Textured PEI (polyetherimide) or other compatible surfaces
• Printing speed: Less than 300 mm/s

Physical Properties

• Density: 1.26 g/cm³
• Melting point: 158°C
• Deflection temperature under load: 57°C
• Softening temperature (Vicat test): 62°C

Mechanical Properties

• Tensile strength (XY): 38 ± 3 MPa
• Elongation at break (XY): 10.5 ± 2.1%
• Bending strength (XY): 72 ± 5 MPa
• Bending modulus (XY): 2993 ± 182 MPa
• Impact strength (XY): 66.2 ± 3.9 kJ/m²