Creality SpacePi X4 Filament Dryer 4005010100

Creality SpacePi X4 Filament Dryer

Creality SpacePi X4 is a powerful dual-chamber filament dryer, allowing you to dry up to 4 spools simultaneously with full temperature control from 45 to 85°C. Thanks to the active drying technology, fast heating, and quiet operation, you can prepare PLA, PETG, TPU, ABS, or PA-CF filaments for printing in a reproducible and stable way, eliminating moisture, bubbles, and shagging during printing.

Dry a variety of filaments

The device features two independently controlled heating chambers, allowing you to set different temperatures for different filaments (e.g., 50°C for PLA and 85°C for PA-CF). You can use one or both chambers as needed, which saves time and energy in a small workshop or when working with different materials simultaneously.

Speed and uniformity

With 200W + 200W PTC heaters, SpacePi X4 heats up to 85°C in about 20 minutes. The 360° air circulation ensures even heat distribution, and the SpaceDry 4.0 technology with active dehumidification and desiccant regeneration guarantees effective moisture removal without changing cartridges.

Quiet, cheap, efficient

The Active Silent system keeps noise levels to just 43-46 dB, allowing you to work comfortably at home and in the workshop. The Creality SpacePi X4 offers energy-efficient operation with an energy consumption of 0.124 kWh in single-chamber mode and 0.208 kWh in dual-chamber mode, reducing the cost of preparing filaments for printing.

Wide compatibility

The Creality SpacePi X4 filament dryer supports spools up to 200 mm in diameter and 150 mm in width with 1.75 mm and 2.85 mm diameter filaments. This means you can dry both standard 1 kg spools and larger 2 kg spools.

Safe operation

The Creality SpacePi X4's triple protection system includes fan control, heater temperature protection, and sensors that monitor the temperature in the chambers. This allows you to use the device without worrying about overheating or damaging the filaments.

Everyday convenience

The dryer is equipped with a chamber backlight, a sliding lock, anti-burn rollers, and a moisture-proof seal to ensure comfort. Additionally, the device signals the end of drying with a sound, making it easy to use.

You control as you please

The EDry UI panel allows you to precisely control drying parameters, including temperature, drying time (1-48 hours), and threshold humidity. You can use automatic modes or custom settings to tailor the drying process to the requirements of your specific filament.

Included

• Filament dryer
• Power cord
• User manual

Specifications

• Manufacturer: Creality
• Model: SpacePi X4
• Manufacturer code: 4005010100
• Rated power: 360W
• Temperature range: 45-85°C
• Drying time: 1-48 hours
• Input voltage: 220-240V 50/60Hz
• Supported filament: Spool diameter 200 mm, Width 150 mm, Filament diameter 1.75 / 2.85 mm
• Dimensions: 382 x 290 x 270 mm
• Weight: 5 kg