ANYCUBIC Standard Resin (crimson clay)

ANYCUBIC Standard Resin (Crimson Clay)

ANYCUBIC Standard Resin is a versatile photopolymer resin for LCD and DLP 3D printers using UV curing technology. Its balanced combination of hardness, strength, flexibility and detail accuracy makes it suitable for beginners and experienced creators alike. With a viscosity of 200–230 mPa·s, volumetric shrinkage of 4.5–5.5% and an optimised formula, it supports efficient printing, shorter processing times and smooth finished surfaces.

High precision and detail reproduction

The refined formula provides high dimensional accuracy and reproduces fine model features. Volumetric shrinkage of approximately 4.5–5.5% helps reduce the risk of deformation, while the mechanical properties balance stiffness, strength and damage resistance. The manufacturer specifies printing accuracy of ±0.2 mm for sharp edges and clearly defined details.

Faster printing and easier post-processing

Low viscosity and good flowability help accelerate printing and support consistent layer formation. The resin releases air bubbles quickly, helping produce smoother surfaces and reduce imperfections. Good adhesion to the build plate also helps prevent models from peeling off and reduces the risk of print failures.

Comfortable use and broad compatibility

The specially developed low-odour formula is designed to improve comfort during extended printing sessions. Finished prints have a uniform colour and smooth surface, making them suitable for painting and further processing. The resin is compatible with popular LCD and DLP printers using UV curing technology at 405 nm and is particularly well suited to Anycubic printers.

Specifications

• Manufacturer: ANYCUBIC
• Model: Standard Resin
• Colour: Crimson Clay
• Material: Photopolymer resin
• Wavelength: 365–405 nm
• Viscosity: 200–230 mPa·s at 25°C
• Density: 1.13 g/cm³
• Hardness: 84–86 HD
• Tensile strength: 40–50 MPa
• Elongation at break: 12–16%
• Flexural modulus: 50–60 MPa
• Flexural strength: 1400–1600 MPa
• Young’s modulus: 1600–1800 MPa
• Izod impact strength: 103 J/m
• Volumetric shrinkage: 4.5–5.5%
• Printing temperature: 20–50°C
• Recommended ambient temperature during printing: 20–40°C
• First-layer exposure time: 20–40 s
• Standard-layer exposure time: 2–3.6 s
• Cleaning agent: 95% IPA
• Cleaning time: ≥3 min
• UV wavelength during curing: 405 nm
• Curing temperature: 18–30°C
• UV irradiance: 25,000–30,000 µW/cm²
• Curing time: 3 min
• Shelf life: 18 months
• Weight: 1 kg