ANYCUBIC Standard Resin HD (gray)

ANYCUBIC Standard Resin HD (Gray)

ANYCUBIC Standard Resin is a versatile photopolymer resin for LCD and DLP 3D printers using UV curing technology. It combines hardness, strength, flexibility and accurate detail reproduction, making it suitable for both beginners and experienced makers. Its low viscosity of 200–230 mPa·s, volumetric shrinkage of 4.5–5.5% and optimised formula support efficient printing, shorter processing times and smooth finished surfaces.

High precision and detailed reproduction

The refined formula provides high dimensional accuracy and reproduces fine model features. Volumetric shrinkage of approximately 4.5–5.5% helps reduce the risk of deformation, while the mechanical properties balance stiffness, strength and resistance to damage. The manufacturer specifies printing accuracy of ±0.2 mm, supporting sharp edges and clearly defined details.

Efficient printing and post-processing

Low viscosity and good flowability help speed up printing and support consistent layer formation. The resin releases air bubbles quickly, helping produce smoother surfaces and reduce imperfections. Good adhesion to the build plate also helps prevent models from peeling away and reduces the risk of print failures.

Comfortable use and broad compatibility

The specially developed low-odour formula improves comfort during extended printing sessions. Finished prints have a uniform grey colour and smooth surface, making them suitable for painting and further processing. The resin is compatible with popular LCD and DLP printers using UV curing at 365–405 nm and works particularly well with Anycubic printers.

Specifications

• Manufacturer: ANYCUBIC
• Model: Standard Resin
• Colour: Grey
• Material: Photopolymer resin
• Wavelength: 365–405 nm
• Viscosity: 200–230 mPa·s at 25°C
• Density: 1.13 g/cm³
• Hardness: 84–86 HD
• Tensile strength: 40–50 MPa
• Elongation at break: 12–16%
• Flexural modulus: 50–60 MPa
• Flexural strength: 1,400–1,600 MPa
• Young’s modulus: 1,600–1,800 MPa
• Izod impact strength: 103 J/m
• Volumetric shrinkage: 4.5–5.5%
• Printing temperature: 20–50°C
• Recommended ambient temperature during printing: 20–40°C
• First-layer curing time: 20–40 s
• Standard-layer exposure time: 2–3.6 s
• Cleaning agent: 95% IPA
• Cleaning time: ≥3 min
• UV wavelength during curing: 405 nm
• Curing temperature: 18–30°C
• UV irradiance: 25,000–30,000 µW/cm²
• Curing time: 3 min
• Shelf life: 18 months
• Weight: 1 kg