ELEGOO Standard 1.0 Resin (semi-transparent)

ELEGOO Standard Resin 1.0

ELEGOO Standard Resin 1.0 is a UV photopolymer for 3D printing, compatible with LCD and DLP printers. Its formula offers good fluidity, fast curing, high precision and low shrinkage, helping reproduce shapes and fine design details accurately. It is suitable for figurines, decorative models, hobby projects and other designs where detail and print stability are important.

High precision and low shrinkage

The resin can reproduce fine details, textures and complex shapes. Low shrinkage during curing helps preserve the design’s geometry, particularly in models with many small parts. Once cured, the material offers good hardness and stability, helping finished models resist deformation.

Good flow and stable printing

Good fluidity helps the resin spread quickly in the vat and return efficiently to the print area between layers. Combined with fast curing, this can streamline printing and support consistent results. The material also adheres well to the build plate, helping keep prints in place during operation.

Cleaning and model removal

After printing, the resin makes prints easy to clean and remove from the build plate. This is particularly useful for models with many supports that need further preparation after printing.

Preparation and safe use

Mix the resin thoroughly before use. The recommended ambient temperature during printing is 20–25°C. Reference exposure settings are 35 seconds for bottom layers and 3.5 seconds for standard exposure; adjust these values as needed for the printer and print parameters. Wear protective gloves when handling uncured resin, avoid direct skin contact, and store the product out of children’s reach and away from direct sunlight.

Specifications

• Manufacturer: ELEGOO
• Model: Standard Resin 1.0
• Type: UV photopolymer resin for 3D printing
• Colour: Semi-transparent
• Compatibility: LCD and DLP 3D printers
• Recommended operating temperature: 20–25°C
• Reference bottom-layer exposure time: 35 s
• Standard reference exposure time: 3.5 s