Pixel Timer Remote Control Wireless TW-283/DC2 for Nikon

The Pixel Timer Remote Control Wireless TW-283/DC2 enables wireless triggering of your Nikon camera from distances exceeding 80 meters, eliminating the need to physically touch the shutter release or be near the camera.

This multifunctional remote supports five shooting modes:

• Single shooting: Capture a single photo remotely.
• Continuous shooting: Take a series of photos within 1 second intervals.
• BULB shooting: Manually control shutter speed by holding down the remote button to keep the shutter open; releasing the button closes the shutter. This mode supports long exposure photography if your camera allows.
• Delay shooting: Set a timer delay from 1 to 59 seconds and specify the number of photos to be taken (1 to 59).
• Timer schedule shooting: Schedule shots up to 99 hours, 59 minutes, and 59 seconds with customizable photo counts of 1-99, 1-999, or infinite.

The set includes a TW-283TX transmitter and a TW-283RX receiver. The transmitter features an ergonomic grip and an LCD screen displaying channel, battery status, and selected mode. It transmits on a 2.4 GHz frequency across 30 selectable channels. Battery life is up to 1,000 hours standby for the transmitter and 400 hours for the receiver, both powered by two AAA batteries (not included).

The receiver includes a hotshoe adapter with a 1/4" female thread, allowing mounting on the camera or a tripod.

Compatibility

This product is compatible with Nikon cameras using the N3 connector.

Usage Instructions

• Insert AAA batteries into both transmitter and receiver.
• Turn on the receiver and mount it on the camera hotshoe or tripod.
• The transmitter can also be connected directly to the camera via the supplied cable for wired use.
• Use the transmitter's clear LCD menu to select the desired shooting mode.
• The transmitter features an auto-shutdown after 30 minutes; the receiver remains on until manually switched off.