Power station ALLPOWERS R2500 V2

ALLPOWERS R2500 V2 Power Station

The ALLPOWERS R2500 V2 is a portable power station with a capacity of 2016 Wh, equipped with a LiFePO4 battery and a 2500 W pure sine wave inverter with a peak power of up to 4000 W. It can serve as a power source at home during a power outage, while camping, in a RV, while traveling, or when working away from an outlet. It supports charging from the AC grid, solar panels, a 12/24 V automotive system, and a generator, and combining grid and solar power allows for an input power of up to 2,500 W. The UPS function with a switchover time of approximately 15 ms, Wi-Fi and Bluetooth control, and the ability to expand the system up to 20 kWh broaden the device’s range of applications.

2,500 W of Pure Sine Wave Power

The built-in inverter generates a pure sine wave, allowing the station to power both simple devices and more demanding electronics. The 2,500 W continuous power output can power, among other things, a refrigerator, washing machine, electric kettle, small oven, fan, audio/video equipment, and select power tools. The peak power of up to 4,000 W, on the other hand, makes it easier to operate devices that temporarily require more energy when starting up.

LiFePO4 battery with over 3,500 charge cycles

The station uses a 48 V, 42 Ah LiFePO4 battery with a capacity of 2,016 Wh. This technology works well in devices intended for regular use, as the battery retains approximately 80% of its original capacity after more than 3,500 charge cycles. Its operation is monitored by a BMS system that provides protection against, among other things, overcharging, over-discharging, overloading, short circuits, excessive current, and abnormal temperatures.

Several ways to recharge

The ALLPOWERS R2500 V2 can be charged in a way that suits your current circumstances. When plugged into an AC outlet, it supports an input power of up to 1,500 W, allowing a full charge to take approximately 1.3 hours. When using solar panels, the station accepts up to 1,000 W of solar energy, which, under the right conditions, allows the battery to be recharged in about 2 hours. Charging from a 12/24 V vehicle electrical system and a generator is also available, while using both AC power and solar panels simultaneously further reduces the time needed to recharge the battery.

UPS Function for Emergency Power

The R2500 V2 can function as an emergency power source for devices used at home or in the workplace. The UPS function enables automatic switching to battery power in approximately 15 ms after a mains power outage. As a result, this solution can be used with computers, network devices, audio/video equipment, or other devices for which a sudden power outage would be problematic.

USB Ports and App Control

The station allows for the simultaneous connection of several devices using different power standards. In addition to AC outputs, it is equipped with two USB-C ports with a maximum combined power of up to 200 W and four USB-A ports, including two with up to 12 W and two supporting up to 36 W. Wi-Fi and Bluetooth connectivity allow you to connect the R2500 V2 to a mobile app to conveniently monitor operating parameters, charge level, and active outputs.

System Scalability

The ALLPOWERS R2500 V2 can serve as both a standalone mobile power source and a component of a larger system. Thanks to compatible B3000 expansion batteries, the capacity can be increased to as much as 20 kWh, allowing you to store a larger energy reserve for longer power outages or more demanding applications. The station also supports parallel connection, allowing the available AC power to be increased to up to 4,000 W and 12,000 W of peak power.