AnyCubic Water-Wash Resin + (Grey) SSXGY-054D

AnyCubic Water-Wash Resin + (Gray)

AnyCubic Water-Wash Resin+ is a high-precision resin with minimal shrinkage during curing, ensuring detail retention in complex models. Its unique formula provides strength and flexibility, making models resistant to cracking. Prints can be stored for up to 3 years without risk of damage.

Cost-Effective and Efficient

This resin allows for cleaning in three ways, eliminating the need for alcohol and IPA, thus reducing costs and increasing efficiency. You can clean models using ultrasonic methods, a dedicated machine like AnyCubics Wash & Cure, or simply with water.

Safety and Comfort

With low odor emissions, this product is pleasant to use and is suitable for those seeking environmentally friendly materials.

Faster Printing

Its lower viscosity allows for faster printing and reduced exposure times, enhancing productivity. It is compatible with a wide range of UV wavelengths (365-405nm), making it suitable for most 3D printers.

Physical and Chemical Properties

• UV Wavelength: 365-405 nm
• Density: 1.15-1.20 g/cm
• Viscosity: 150-250 mPa-s at 25C
• Hardness: 80 Shore D
• Tensile Strength: 30-45 MPa
• Elongation at Fracture: 8-15%
• Flexural Strength: 50-60 MPa

Recommended Printing Parameters

• Layer Thickness: 0.05mm
• Exposure Time: 1.5s to 8s
• No-Exposure Time: 5.5-2.5s
• Lower Layer Exposure Time: 20s to 35s
• Number of Lower Layers: 2-6

Download: Safety Data Sheet