Jauns
Mikrofonu aksesuāri | Uztvērēji |
The Synco WMic-T3 is a camera-mount wireless lavalier microphone system offering a flexible and complete solution for videographers, vloggers, and mobile journalists who need to record two subjects to cameras, camcorders, or mobile devices such as smartphones and tablets, even at great distances. The system utilizes the UHF frequency band from 512 to 537 MHz (Group A) and 564 to 589 MHz (Group B) to avoid interference from VHF and 2.4 GHz microphone systems, Bluetooth, and Wi-Fi. The WMic-T3 includes two omnidirectional lavalier microphones for convenient voice capture in video shoots, interviews, and more. The transmitters can accommodate mic sources or line-level signals. The dual-channel receiver can be hooked on your belt, attached to a camera shoe, or mounted on a tripod. Connect its main 3.5mm output to the mic input of your camera with the supplied TRS cable, to the input of your mobile device with the included TRRS cable, or to a professional camcorder using the provided 3.5mm to XLR cable. A separate 3.5mm headphone output lets you monitor your signal in real time to ensure it is free of distortion.
Reach up to 100m (interiors) or 180m (open space)
100 switchable channels
75/150 Hz low cut filter
One touch reset system
Built-in battery with USB Type-C cable charging
Includes:
Transmitter (TX) x2
Receiver (RX) x1
3.5mm Mic Audio Input Cable x1
3.5mm-3.5mm Audio Output Cable x1
3.5mm-XLR Audio Output Cable x1
Belt Clip x3
Cold Shoe Mount x1
Wind Muff x2
Carry box x1
User Manual x1
Supplied accessories include 3x belt clip, 1x flash socket reducer and 3.5mm TRS/TRRS/XLR interconnect cable. The system also features internal batteries (3.7V/1800mAh) with up to 10h of battery life and USB-C rechargeability (3.5h of charging at 5V/1A); a switchable 75/100Hz high-pass filter; a quick reset button for the entire system; and noise reduction technology... The transmitter supports both microphone and line level. The receiver can be easily connected to DSLR/DSLMs using the included TRS cable, to cell phones/tablets using the TRRS cable, or to professional cameras using the included TRS/XLR cable. The signal can be monitored via the 3.5mm headphone output (100 mW / 32 Ω).
RX/TX parameters
Mikrofonu aksesuāri | Uztvērēji |