Jauns
Produkta veids | Printeru piederumi |
The DNP Spacers for 13x18 paper 2 Pieces are made for the DS-RX1 printer. With the Spacers you can place 13x18 paper in your DS-RX1 printer.
When 13x18 paper is used, you need these because these paper adapters ensure that the paper stays exactly in the middle of the printer. A set of spacers is supplied with the DS-RX1 as standard.
First place the spacers over the paper adapters, then place the adapters in the roll of paper. Then place the roll of paper in the printer.
The DNP Spacers for 13x18 cm paper are designed for the DS-RX1HS printer. Using the spacers, you can use 13x18 cm paper in your DS-RX1 and DS-RX1HS. The 13x18 cm paper is narrower than the 10x15 cm and 15x20 cm paper. With these spacers the 13x18 cm paper still fits well in your printer. This set of spacers is already included with the RX1HS.
First you place the spacers over the paper adapters. Then you slide the adapters in the roll of paper. Then you place the whole thing in your printer. This way you can make prints on the size 9x13 cm, 13x13 cm and/or 13x18 cm.
Produkta veids | Printeru piederumi |