0 gab. gab. 0 gab. - € 0.00
Iepirkumu groza priekšskatījums
Nav produktu
Bezmaksas saņemt veikalā Piegāde
€ 0.00 PVN
€ 0.00 Pavisam kopā
Produkts veiksmīgi pievienots iepirkumu grozam
Daudzums :
Pavisam kopā
Tavā grozā ir 0 produkti. Tavā grozā ir 1 produkts.
Kopā produkti ar PVN
Kopā piegāde ar PVN Bezmaksas saņemt veikalā
PVN € 0.00
Pavisam kopā ar PVN
Facebook 
Google 
Foto un video tehnikas veikals, noma un ekspertu padomi
- Uzrakstīt atsauksmi
Depending on the magnification factor, the magnification range of the microscope can be varied.
- Magnification: 0,5x
- Scope of delivery: Additional lens
BRESSER additional objective 0.5x
Produkta kods: 47133
SKU: 47133
EAN: 4007922151274
Stāvoklis: Jauns
Ražotājs: Bresser
Apskatīt līdzīgus produktus
Apskatīt līdzīgus produktus
Mākslīgā intelekta asistents
Šī ir mūsu jaunās asistenta tērzēšanas beta versija, kas spēj atbildēt gan uz standarta, gan sarežģītiem jautājumiem par produktu un veikala darbību.
vai pajautājiet par
Kādas ir funkcijas? Vai šis ir noliktavā? Īpašie piedāvājumi un akcijas?
Oriģinālais preces apraksts no ražotāja (oriģinālā valodā)
Additional objective for BRESSER Stereo Microscopes Advance ICD 5804000 and Science ETD-101 5806100
With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.
Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.
Art.Nr. 5941480 0.5 x Magnification Art.Nr. 5941481 0.75 x Magnification Art.Nr. 5941482 1.5 x Magnification Art.Nr. 5941483 2.0 x Magnification
With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.
Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.
Art.Nr. 5941480 0.5 x Magnification Art.Nr. 5941481 0.75 x Magnification Art.Nr. 5941482 1.5 x Magnification Art.Nr. 5941483 2.0 x Magnification
Produkta apraksts
