SanDisk Extreme PRO SD UHS-II Card Reader/Writer Type A (SDDR-399-G46)

SanDisk Extreme PRO SD UHS-II karšu lasītājs/rakstītājs
Profesionāla līmeņa pārsūtīšanas veiktspēja kompaktā SD™ karšu lasītājā

• Lasīšanas ātrums: līdz 500 MB/s
• Formas koeficients: darbojas ar SDHC/SDXC kartēm, kas nav UHS un UHS-I/-II.
• Interfeiss: USB 3.0

Īsumā
✓ Viena slota SD™ UHS-II karšu lasītājs/rakstītājs
✓ Saderīgs ar USB 3.0/USB 2.0
✓ Optimizēts SanDisk SD UHS-II kartēm

Palieliniet darbplūsmas efektivitāti
SanDisk Extreme PRO® SDTM UHS-II karšu lasītājs/rakstītājs ir izstrādāts, lai palielinātu profesionālu fotogrāfu un videogrāfu darbplūsmas efektivitāti. Pietiekami mazs lauka darbiem, kompaktais lasītājs ir veidots tā, lai atbilstu UHS-II karšu tehnoloģijas augstas veiktspējas prasībām, un tas piedāvā atbalstu ātram pārsūtīšanas ātrumam. Ar USB 3.0 interfeisu (un atpakaļsaderīgu ar USB 2.0) SanDisk Extreme PRO SD UHS-II lasītājs/rakstītājs ir labākā izvēle veiktspējai un efektivitātei, ja tas ir savienots pārī ar SD UHS-II atmiņas karti2.

Atbalsts īpaši ātram SD UHS-II karšu pārsūtīšanas ātrumam
SanDisk Extreme PRO SD UHS-II karšu lasītājs ātri pārvieto saturu, lai paātrinātu pēcapstrādes darba plūsmu.

>Saderība
Saderīgs ar UHS-II un USB 3.0, saderīgs ar UHS-I un ne-UHS SD kartēm, kā arī USB 2.0.

Kompakts SD Karšu lasītājs
SanDisk Extreme PRO SD UHS-II karšu lasītāja mazā izmēra dēļ tas ir lieliski piemērots lauka darbiem un fotografēšanai uz vietas.

Kastītē
(1) SanDisk Extreme PRO SD UHS-II karšu lasītājs/rakstītājs A tips

Tehniskie dati

MPN

SDDR-399-G46

Veiktspējas lasīšana

līdz 500 MB/s

Formas faktors

Darbojas ar ne-UHS un UHS-I/-II SDHC/SDXC kartēm

Interfeiss

USB 3.0

Saderība

Saderīgs ar USB 3.0/USB 2.0

Izmērs

11,94 × 34,80 × 57,15 mm (0,47 × 1,37 × 2,25 collas)

Svars

14,20 g (0,03 mārciņas)

Garantija

2 gadi*3

Informācijas atklāšana
1. Balstīts uz USB 3.0 specifikāciju; veiktspēja var atšķirties atkarībā no lietošanas gadījuma un resursdatora ierīces. 1 MB = 1 000 000 baiti.
2. Karte nav iekļauta.
3. Papildinformāciju skatiet vietnē www.sandisk.com/wug

Glidecam Smooth Shooter (GLSSH) for cameras up to 4.5 kg
Professional Camera Stabilization System with one spring arm

The GLIDECAM SMOOTH SHOOTER is the World's most sophisticated and affordable body mounted Camera Stabilization System designed for Cameras weighing up to 10 pounds**. The GLIDECAM SMOOTH SHOOTER system will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake.

The SMOOTH SHOOTER system works by isolating your body's motion from your camera, while your camera is balanced in a relatively motionless and isolated state. The SMOOTH SHOOTER'S Support Arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the Support Arm, which isolates your motions from the camera in a way that creates smooth camera footage.

The GLIDECAM SMOOTH SHOOTER does not come with a hand-held stablizer**; however, it is specifically designed to be used with them. If you already own one of our hand-held stabilizers, then you will be able to use it by simply attaching it to the end of the Smooth Shooter's Support Arm. Your Glidecam hand-held stabilizer** does not need to be modified to work with the GLIDECAM SMOOTH SHOOTER. You can use your camcorder's flip out LCD monitor, or a monitor that is attached to the base of your Glidecam hand-held stabilizer**. This allows for remote viewing of the camera's image without disturbing the orientation of the system.

When using the Glidecam hand-held stabilizer** in hand-held mode, it is your arm that carries all of the weight. However, when the Glidecam hand-held stabilizers** are used with the SMOOTH SHOOTER, it is the SMOOTH SHOOTER'S Spring-loaded Support Arm that carries all of the weight. Because of this, you will now be able to shoot for extended periods of time, whereas before, the stress associated with hand-holding the weight reduced your shooting time.

The GLIDECAM SMOOTH SHOOTER is not just an affordable replacement for the Glidecam V-8; it is a highly developed and meticulously engineered camera stabilization system. Its ability to shoot smooth imagery within its weight range is extraordinary. It out performs all of the competition in its class, yet remains truly economical. The SMOOTH SHOOTER is the realization of the need to stabilize lightweight cameras using the same degree of sophistication employed to stabilize heavy cameras. With the GLIDECAM SMOOTH SHOOTER you will be able to acquire the type of smooth footage you've always dreamed of.

**The Glidecam Smooth Shooter System is designed for use with the Glidecam XR-2000, XR-4000, HD-2000, HD-4000 and the DEVIN GRAHAM Signature Series Glidecam Hand-held Stabilizers. The weight plates provided with the Glidecam Smooth Shooter System are not compatible with the DEVIN GRAHAM Signature Series.

In The Box
(1) Smooth Shooter Support Vest
(1) Smooth Shooter Support Arm
(1) Docking Bracket (only to hold the system)
(1) Aluminum Arm Post
(6) Steel Head Weight Plates
(1) Hardware and operations manual

Workshop
We offer for this product a 2 hour introduction workshop and also a 1 day trainings course. Please contact us to arrange a meeting or even get more Information.

Technical Data

Arm

Length min.

appr. 29,0 cm (11,42”)

Length max.

appr. 61,0 cm (24,02”)

Width min.

appr. 27,0 cm (10,63”)

Width max.

appr. 40,0 cm (15,75”)

Height

appr. 7,5 cm (3”)

Weight

appr. 2,2 kg (78,57 Oz)

Springs

2

Vest

Length

appr. 35,0 cm (13,78”)

Width

appr. 36,0 cm (14,17”)

Height min.

appr. 47,0 cm (18,5”)

Height max.

appr. 52,0 cm (20,47”)

Weight

appr. 2,2 kg (78.57 Oz)

Material

Codura

Docking Bracket

Length

appr. 31,0 cm (12,2”)

Width

appr. 11,0 cm (4,3“)

Height

appr. 9,0 cm (3,5 “)

Weight

appr. 0,55 kg (19,4 Oz)

All measurements approx.