RODE M3 highly versatile end-address condenser microphone MROD300

RODE M3 ir ļoti daudzpusīgs kondensatora mikrofons par pieejamu cenu, ko var izmantot gan studijā, gan uz skatuves.

RODE M3 ir viens no pieprasītākajiem mikrofoniem tirgū, pateicoties tā daudzpusībai. Tā kā mikrofonu var darbināt ar 9 V akumulatoru tieši mikrofona korpusā, tas ir ideāli piemērots visur, kur nav iespējama fantoma barošana no miksera.

Pateicoties smagajam metāla korpusam un iekšēji atsperotai 1/2" kondensatora kapsulai, M3 ir piemērots gan studijā, gan uz skatuves. To var droši izmantot vokāla, akustiskās ģitāras, bungu skaņas uztveršanai, un tas ir lieliski piemērots ģitāras kombinācijas vai ambientās skaņas uztveršanai. Tas ir piemērots arī prezentētājiem.

Mikrofonam ir iespēja samazināt jutību divās pakāpēs (-10 dB un 20 dB). Pārslēdzējs atrodas bateriju nodalījumā. Tas ļauj nevainojami uzņemt skaļus skaņas avotus, piemēram, ģitāras bloku vai bungas.

Augstfrekvences filtru var aktivizēt uz mikrofona slēdža. Tas ir iestatīts uz 80 Hz, lai varētu viegli samazināt nevēlamās zemās frekvences un apstrādes trokšņus.

The RODE M3 is a highly versatile and affordable condenser microphone that can be used both in the studio and especially on stage.

The RODE M3 is one of the most sought-after microphones on the market thanks to its versatility. With the ability to be powered by a 9V battery directly in the body of the microphone, it is ideal wherever phantom power from a mixer is not an option.

With a heavy metal body and internally sprung 1/2" condenser capsule, the M3 is at home in the studio as well as on stage. You can safely use it to pick up vocals, acoustic guitar, drums, and it's great for picking up guitar combos or ambience. It is also suitable for presenters.

The microphone has the ability to attenuate the sensitivity in two steps (-10dB and-20dB). The switch is located in the battery compartment. This allows you to seamlessly capture loud sound sources like a guitar box or drums.

The high-pass filter can be activated on the microphone switch. It is set to 80Hz so that unwanted low frequencies and handling noise can be easily reduced.

• condenser microphone
• cardioid
• can be powered by 9V battery or 24-48V phantom
• up to 200 hours battery life
• battery status indicator
• frequency range 40 Hz - 20 kHz
• xLR-3 pin connector
• rugged metal body
• power switch
• attenuation switch (-10db and -20db)
• hi-pass filter (80Hz) to eliminate low frequencies
• low handling noise due to excellent cushioned insert
• high level of radio immunity
• made in Australia
• 10 year warranty (subject to registration of the microphone on the manufacturer's website)