SARAMONIC VMIC PRO II ADVANCED SHOTGUN MICROPHONE VMIC PRO II

SaramonicVmic Pro Mark II **on-camera condenser shotgun microphone. **

The SaramonicVmic Pro Mark II is a supercardioid on-camera condenser shotgun microphone that provides broadcast-quality audio to DSLR, Mirrorless and Video Cameras. The Vmic Pro Mark II features an input level control (-1 OdB, OdB, +20dB), a high-pass filter (150 Hz) and a high-frequency boost ( +6dB) to increase intelligibility of dialogue. The detachable 3.5mm cable connects the Vmic Pro Mark II to your camera’s audio input and the stereo headphone output allows you to monitor the incoming audio. The specially designed shock mount system provides isolation from vibration and mechanical noise

• Supercardioid polar pattern[
• Integrated shock: mount system
• High-pass filter ( 150 Hz)
• High-frequency boost (+6dB)
• Three-position level control (-10dB, OdB, +20dB)
• Headphone monitor output
• 3.5mm audio output to camera
• Power/low battery indicator
• Foam windshield included
• Lightweight all-metal construction
• Powered by 2 AA batteries

The Saramonic Vmic Pro Mark II is a new improved version of an active directional microphone with high sound quality. Its compact and ultra-lightweight body does not weigh down dedicated equipment such as DSLR cameras, camcorders or audio recorders. It is a great choice for filmmakers as a main microphone, as well as a wired "backup" in video productions.   Mark II The new Vmic Pro Mark II is primarily a reduced inherent noise, which positively affects the high performance of the microphone in very difficult conditions. An updated main function panel that helps you clearly set the desired microphone settings. Super-cardioid characteristic The microphone's super-cardioid directional characteristic allows for effective reduction of unwanted ambient sounds, while the microphone mainly captures what can be heard in front of the camera or camcorder, but also a small area behind the microphone. Hot Shoe and "Shock Mount" The metal shoe with 3/8" thread allows the microphone to be easily mounted on a variety of cameras, camcorders, various mounts and photo tripods. The robustly designed mounting system ensures isolation from vibrations during accidental or intentional camera movements. Panel Features The Vmic Pro Mark II is equipped with a selectable input level control in three positions (-10dB, OdB, +20dB), thus allowing you to lower or boost its volume. In addition, a high-pass filter (150Hz) attenuates low frequencies and an additional attenuator function (+6dB) will greatly enhance dialogue intelligibility.   Headphone input Unlike other brands, the Saramonic Vmic microphone series is equipped with a headphone input from the start. This is a very important feature to properly adjust the sound before recording or to correct optional settings during video recording.   3.5mm TRS mini jack input Use the detachable 3.5mm TRS mini jack cable to connect your microphone to your camera or camcorder. The non-integrated cable reduces the risk of distortion when connecting to other devices when using additional adapters or adapters.   Unlimited Possibilities The microphone can be connected to smartphones using appropriate cables or XLR adapters.   Specification - Type: Condenser microphone - Characteristics: Super-cardioid - Frequency range: 75 Hz to 20 kHz - Sensitivity" -38 dB±2dB (OdB-1V/Pa, at 1KHz) - Signal to noise ratio: 80dB - Output impedance: 200 Ohms or less - Power supply: 2x AA - Output: 3.5mm TRS mini jack connector - Filter type: high pass (150Hz) - Dimensions: 255×69.4×98.9 mm - Net weight: 295 g   Kit contents - Vmic Pro Mark II microphone - foam shield - 3.5 mm TRS/TRS mini jack cable